Guest Book

Scott Maddox From: Wiggins, MS, Visited on Tuesday, February 7, 2017
Scott 's Comments: Your work is inspiring and uplifting. Impressive to say the least!
Tom Antrim From: Mountain View, Missouri, Visited on Sunday, February 5, 2017
Tom's Comments: I recently have been searching for Segment calculators and most are way too complex and found yours and knew instantly it would do the job. I also am blown away at your talent.
Paul Hedman From: Moorhead, Minnesota., Visited on Saturday, January 21, 2017
Paul 's Comments: Larry, you do the most incredible work. All of it is top shelf in concept and execution, beautiful done with fantastic humor.
Louis Pittman From: Bismarck N D , Visited on Friday, January 20, 2017
Louis's Comments: Nice work Marley i am member of Dakota wood turners
Bill Blasic From: Erie, PA, Visited on Thursday, January 19, 2017
Bill's Comments: From WoW, Larry an amazing site! Will definitely let others know about it.
Ken Wieland From: Toledo Ohio, Visited on Saturday, January 14, 2017
Ken's Comments: Beautiful work. Really mind blowing work. Thank you for the calculator it helps a lot.
Paulo Teixeira From: Porto Alegre Brasil, Visited on Wednesday, January 11, 2017
Paulo's Comments: Dear Sirs! For several years I have been browsing the internet, which is why I have visited your site many times and every time I visit, I am surprised. The purpose of this is to leave my record of recognition for your work. Thank you for making the world whole many of your teachings. A big hug.
Ken Lakits From: Lakewood, Ca, Visited on Sunday, December 25, 2016
Ken's Comments: Great page and work. I'm a member of Orange County woodworkers and woodturners. Look fwd to meeting you one day.
Neil Coy From: Arkansas, Visited on Saturday, December 17, 2016
Neil's Comments: Really get a lot of use of the calculator. Beats both cut and try or lot of forgotten math. Thank you
Randy Bass From: Valley Springs, CA, Visited on Monday, December 5, 2016
Randy's Comments: Really enjoyed your work
Edward Hogue From: Janesville, Wisconson , Visited on Saturday, December 3, 2016
Edward's Comments: Great work I wished I was half that good, I just can't afford the classes. I was going to join a club but they meet at night & I can't drive at night.
kwame dupre From: hainesville, Illinois, usa, Visited on Friday, November 25, 2016
kwame's Comments: thank you for the inspiring work.
CSD Woodshop From: Davidson, NC, Visited on Monday, October 24, 2016
CSD's Comments: Me and my fellow students love this site!!!!!!
Peter Boyd From: Perth Australia, Visited on Tuesday, October 11, 2016
Peter's Comments: I am just starting out with segmented turning and want to create my own designs in vases and bowls but was unsure of how wide to make the segments. I will try this program and see how it works. Thanks in advance
James Hunter From: Connecticut, Visited on Wednesday, September 14, 2016
James's Comments: I am truly impressed with your skills! Thanks for sharing!
Rob Nicklasson From: Ontario , Visited on Monday, August 8, 2016
Rob's Comments: Your on line tool works great thank you very much
Dustin Crook From: Previous OC Woodworker, Visited on Monday, August 8, 2016
Dustin's Comments: Totally enjoyed your booth at Laguna Art Festival as much as I have from seeing your work in the past. With your help from your video with the trianglular feature ring I made a simular feature ring for a bowl. Thanks for sharing your talents.
George Kulakowski From: HB, Visited on Sunday, June 5, 2016
George's Comments: Larry, thank you for the fine presentation last Thursday. First time I brought Winnie to one of the OCWA meeting, and she wasn't disappointed. You were awesome! thanks again G
Kevin Bergen From: Pinetop Arizona, Visited on Tuesday, May 3, 2016
Kevin's Comments: Larry You do amazing work. I enjoy your website. Do keep up the good work Thanks Kevin Bergen
Dwight Tellier From: Gulfport, MS, Visited on Monday, March 7, 2016
Dwight's Comments: Thanks for the info and calculator!
Garry Hirsch From: Mt. Dora, Florida, Visited on Monday, February 22, 2016
Garry's Comments: Enjoyed my visit to your site. You do some beautiful work, especially liked your Christmas angel.
Bobby Chandra From: Gatineau, Quebec (Canada), Visited on Tuesday, February 16, 2016
Bobby's Comments: Recently retired and wishes to explore this art of woodturning.Your site is very intuative,and by the way a great Calculator.
Doug Anthony From: Tustin,Calif., Visited on Monday, February 1, 2016
Doug's Comments: I am a fellow member of the Orange County Wood Turners Association. And I am somewhat intimidated by your expertise. But truly in awe of your talent.
Eric MacDonald From: Elgin ,Scotland, Visited on Friday, January 15, 2016
Eric's Comments: Great site Thanks
Alan Papendick From: Winrter Haven, FL, Visited on Sunday, November 1, 2015
Alan's Comments: I am a past President of the Michigan Industrial & Technology Education Society (MITES). Our website is I came across your site while researching Inside-Out Ornament articles for our membership to use in their classroom. A Friend of mine will be trying to incorporate this technology in the Machine Shop. If he is successful. I will get something written up for you.
Mike Mains From: Cortez, CO, Visited on Wednesday, September 9, 2015
Mike's Comments: (Youtube) Thanks so much for sharing the segmented bowl calculator. It's very useful.
Douglas Gillie From: Halifax ns, Visited on Saturday, August 8, 2015
Douglas's Comments: Thanks for the great segment calculator .it makes designing a bowl easy,
Jan Ayres From: Hemet, Visited on Sunday, August 2, 2015
Jan's Comments: Your creations are even more amazing and beautiful than earlier works.
Jay Mullins From: North Carolina, Visited on Thursday, July 9, 2015
Jay 's Comments: I happened on your site recently,and was very impressed with your work. As a relatively new woodturner I try to learn from seeing what others are doing. Thanks for your site.
david grady From: San Antonio, TX, Visited on Wednesday, June 17, 2015
david's Comments: I really am enjoying browsing your site. I turn also, some segmented, some chunks. Nothing like what you do.
ken helm From: licestershier, england, Visited on Tuesday, June 2, 2015
ken's Comments: love your site have done for 3 years
mike taylor From: ocwa fountain valley, Visited on Saturday, May 23, 2015
mike's Comments: fun to see your latest projects to keep us interested
LINO SANTOS From: ELIZABETH NEW JERSEY, Visited on Sunday, May 3, 2015
Richard Davies From: Godalming England, Visited on Thursday, April 16, 2015
Richard's Comments: i follow you on Facebook. Interested in you pen press. Your videos are excellent 😊
David Walker From: Indiana, Visited on Wednesday, March 11, 2015
David's Comments: Very cool site you have. Im just getting into turning and I hope one day to be as good as you are at turning im impressed..
David Williams From: Burleson, Texas, Visited on Friday, March 6, 2015
David's Comments: Good work!
Dan From: Maryland, Visited on Friday, January 23, 2015
Dan's Comments: Many, many thanks Larry for your turning calculator. Your turnings are absolutely incredible.
Jason Waguespack From: Lutcher, Louisiana , Visited on Sunday, January 18, 2015
Jason's Comments: I'm new to woodturning ---- your site inspire me to learn more and get better.
David Wotton From: Bristol,England,UK., Visited on Wednesday, January 14, 2015
David's Comments: I'm a fellow segmented turner, but have a lot to learn!
Dave Fontenot From: Canton, Texas, Visited on Saturday, January 10, 2015
Dave's Comments: Love your work....I'm just a beginner and looking forward to learning.
Gary Land From: Detroit,mi., Visited on Friday, January 2, 2015
Gary's Comments: Mr, Marlley, Thankyou for keeping this site up.I love revisiting this site because of the awesome craftsmanship Thank you again
Terry Odom From: Dothan al, Visited on Sunday, December 21, 2014
Terry's Comments: Very much like your jig used to turn the Christmas ornament would really love to know how it is made
Dean Roadifer From: Lebanon Oregon, Visited on Saturday, December 20, 2014
Dean's Comments: I use your shop utilities all the time. Also enjoy your videos and have turned several projects off of them. Thanks for sharing.
Bill Di Marm From: Rhode Island, Visited on Wednesday, December 10, 2014
Bill's Comments: Haven't watch in awhile, but still learn things every time I watch. I made your pen press a few years ago and use it often. Happy Holidays
Paolo Tenderini From: Turin , Italy, Visited on Thursday, December 4, 2014
Paolo's Comments: Very interesting site! Many ideas and very good projects! Congratulations! Paolo.
Christoffer Bye From: Norway, Visited on Sunday, November 16, 2014
Christoffer's Comments: Impressing work. Have not looked into everything. Will try you calculator.
Tom Lovelace From: Minden La., Visited on Saturday, November 15, 2014
Tom's Comments: Great web site .
Jim Tesen From: Northville, Michigan, Visited on Monday, July 28, 2014
Jim's Comments: I enjoy watching your videos.
Rachel Young's Husband From: Umm........France! ....Or........Paris!....., Visited on Tuesday, July 8, 2014
Rachel Young's's Comments: Good grief! I've waited the requisite 2 dictated by yourself during the VIP night in Laguna Beach...I can only imagine what you will create in the year to come. I loved the B & W swans.......I have seen lathed works in the past ( and present, for that matter ), and you are most certainly the trailblazer to watch! Here's to the future!
Tom Edwards From: U.K., B.C., Canada, Visited on Saturday, June 7, 2014
Tom's Comments: Fantastic workmanship, greatly admired.
Roger Courtney From: Pretoria South Africa, Visited on Thursday, May 22, 2014
Roger's Comments: Really different segmented work I truly love. You are a very talented turner and thanks for the info on your site. Regards Roger
Mario Moran From: Sarnia,Ontario,Canada, Visited on Tuesday, May 20, 2014
Mario's Comments: You are a wizard turner, my main admiration is for the segmented turnings section. Thanks for showing how you do things in the videos; don't worry I wont copy, have no time to progress to that, already in my first 80.
Bill Wells From: Olympia WA, Visited on Sunday, April 13, 2014
Bill's Comments: Been working wood for 60+ years, decided I needed to try something new, been turning wood for all of a month. Will be checking out your website. Thanks.
David Burke From: Clinton Township,MI, Visited on Saturday, March 22, 2014
David's Comments: I like to learn about the techniques for turning.The Celtic knot looks like sometthing I can do.
Toby Harmon From: Parker, Texas, Visited on Sunday, March 9, 2014
Toby's Comments: Very informative site! Great Calculator, Your work is awesome, Thank you for sharing, and giving back! Toby Harmon
Brian Defoe From: Ellicottville N.Y., Visited on Thursday, March 6, 2014
Brian 's Comments: I belong to Western New York Woodturners Club. I enjoyed your vidios on the lathe station. Thank You Brian
Alan MacHardy From: Kamloops B.C., Visited on Tuesday, February 18, 2014
Alan's Comments: Excellent turning videos.
Luis Vergara From: United States, Visited on Friday, February 7, 2014
Luis's Comments: Your work makes me want to hide all my work in a hole Thank you so much for shareing
Carl Mesaros From: Coshocton, Ohio, Visited on Monday, January 20, 2014
Carl's Comments: Hi Larry. Just wanted to thank you for your wonderful site. I have enjoyed turning many of your ornaments. They are so popular as gifts. I'm currently turning 8 penguins for next year. After several attempts I finally managed to turn the Christmas angel, one of which brought $110 at our church auction bazzar! Thanks again for a great site. Can't wait to see what you come up with in 2014.
Dennis Williams From: Valdosta, GA, Visited on Thursday, January 2, 2014
Dennis's Comments: All I can say is I'm amazed by your work... thanks for sharing!
Robin Hoff From: 3d Rock frm the sun, Visited on Thursday, December 19, 2013
Robin's Comments: Great site. Need more info on penguins
Jacqueline Mason From: Suncook, NH, Visited on Thursday, December 12, 2013
Jacqueline's Comments: am so very impressed with the Christmas ornament videos, to me, this is what Christmas should be all about, the music and filming is perfect. love them.
Chuck Morel From: Madison Heights V a, Visited on Tuesday, December 10, 2013
Chuck 's Comments: Really enjoy your videos good job
David Sutton From: Cape Coral, Florida, Visited on Tuesday, December 10, 2013
David's Comments: I really enjoyed your Penguin video. Thank You for sharing it with us. Merry Christmas
Bruce Woody From: Brandon, Florida, Visited on Tuesday, December 10, 2013
Bruce's Comments: I enjoy you site. Great work.
Jack Frost From: Madison Wi, Visited on Tuesday, December 10, 2013
Jack's Comments: Great job. Looks like a lot of fun. Some good ideas for next Christmas.
Stephen Furniss From: Pleasant View, Utah, Visited on Saturday, December 7, 2013
Stephen's Comments: Look forward to each new videos. I would like to see some of camera type and your frame for over head shots.
Luiz C Vespasiano From: Brasil, Visited on Thursday, November 21, 2013
Luiz C's Comments: Hello Marley! Great website, the videos are very good, easy to understand and learn. Very nice the Inside out ornament and the celtic knot. Also very interesting the jig to make balls. Congratulations for your job!
Rob Lucas From: 53 West St. Wellington, Ontario Canada, Visited on Sunday, November 17, 2013
Rob's Comments: Great site and glad I checked it out. your are very talented. will look on youtube to see if you have also posted their.
Robin Thompson From: Whitehorse, Yukon, Visited on Monday, October 28, 2013
Robin's Comments: Beautiful work, and different.
Michele Howell From: Phoenix, AZ, Visited on Tuesday, October 22, 2013
Michele's Comments: I can't tell you how much I love my exquisite wishing well ornament. You are an amazing woodworker!!
Brian Huff From: United States, Visited on Sunday, August 4, 2013
Brian's Comments: I haven't visited your site in a while, and I like the new look... Not that the other was bad, but it's a good look. Keep making the videos they are an inspiration and a great learning tool. Brian Huff White Lake, MI
George & Holly Goodman From: Anaheim, CA, Visited on Wednesday, July 17, 2013
George & Holly's Comments: Nice to see you and catch up at the Festival of Arts tonight.
Suzie Atnip From: Columbia, Tennessee , Visited on Tuesday, June 11, 2013
Suzie's Comments: I am new to turning and was looking for inspiration when I came across your video. Loved watching the turning and the production of the video was great! Your love of turning shows in.your work! Thank you for sharing and hope I can be a third as good at this as you one day! Sincerely , A 65 year old novice!
Mikov Spzielman From: South Africa, Visited on Monday, June 10, 2013
Mikov's Comments: You have the most AMAZING site on wood turning I have ever seen. Well done! Did I say well done !!! I'll be watching your site regularly. Thanks for great tutorials. Mikov
Adrian Barber From: New Zealand Whangarei, Visited on Monday, June 10, 2013
Adrian's Comments: Good work love the turning keep it up
Jim Schoenwalder From: Crivitz, WI, Visited on Wednesday, April 17, 2013
Jim's Comments: What you are doing is incredible! Thanks for what you do for us hackers. I've gotten your newsletter for a year or two and enjoy receiving it. Jim
Mario Moran From: Chile,living in Canada, Visited on Monday, April 15, 2013
Mario's Comments: Very interesting everything you show. Please keep it coming
Mark Smith From: Winter Park, Florida, Visited on Monday, April 15, 2013
Mark's Comments: Relatively new to turning. Recently replaced an ancient CraftsMan lathe (circa 1950) inherited from my Dad with a Nova DVR XP. Hopefully my ability will one day catch up the machine's capability. Very much enjoy your site ...
Don Clarke From: Weymouth, Massachusetts, Visited on Tuesday, April 2, 2013
Don's Comments: Excellent work - Great video
Alfred Lagor From: Millbury, Ma, Visited on Tuesday, March 26, 2013
Alfred's Comments: Very nice sight
JonHarry Hansen From: Lynden,Wa., Visited on Saturday, March 2, 2013
JonHarry's Comments: Enjoyed visiting your facebook site.
Dave Gretencord From: Granger, Indiana, Visited on Thursday, February 21, 2013
Dave's Comments: You have one of the best woodturning websites around with a great variety ideas for your videos. I frequently go back and watch each video again and always see something I missed before. I always look forward for the newest addition. Thanks for the online segmented calculator.
Ray Gattus Sr From: Plainfield, Connecticut, Visited on Thursday, February 21, 2013
Ray's Comments: Mr Marley, I just started turning about 6 months ago. I've been searching the internet for different books and videos showing styles and techniques of turning. Whether to use green (which is easy since my backyard is a state forest) I find the way you turn is absolutely amazing. I'm hoping some day I could have half that talent. I do have a lot of time on my hands now, so I guess practice is the answer and watching you turn is very encouraging. Thank you for sharing your videos
Niels Erik Nielsen From: Denmark, Visited on Sunday, December 23, 2012
Niels Erik's Comments: You are a geni. I love to watch your videos
Dick Mahany From: Morgan Hill California, Visited on Sunday, December 16, 2012
Dick's Comments: Larry, I recently saw your segmented Christmas ball ornament on Sawmill Creek and had to watch your video. The segmented ball is beautiful I enjoyed the tutorial immensly. I'm trying to make one right now ! I also just watched your video on the Celtic knot ornament and it was excellent! Your work is excellent and your videos are great fun and very inspiring to watch. I really enjoy your website and just wanted to say a big THANK YOU for sharing. Merry Christmas and Best Regards,
Vaughn Thom From: Vanderbijlpark, South Africa, Visited on Thursday, December 6, 2012
Vaughn's Comments: Hi Larry. This year's ornament is great! Thank you for the video, I really like your jig, and your new lathe. Best regards, Vaughn
roger kathka From: Missouri, Visited on Sunday, December 2, 2012
roger's Comments: Like you videos
Donny Lawson From: Georgia, USA, Visited on Sunday, November 25, 2012
Donny's Comments: I've been a fan of your turnings for a long time. I love your work. Great Bottle stopper video.
John Jackson From: South Dakota, Visited on Saturday, November 24, 2012
John's Comments: Great site, looking forward to using the caculator.
Steve Duffy From: Durham, England, Visited on Thursday, November 22, 2012
Steve's Comments: Loved your videos, and I am extremely impressed with your work especially your segmented pieces. WELL DONE....
Bob Tate From: Baton Rouge, Visited on Thursday, November 8, 2012
Bob's Comments: Great site and even better turnings!
Norm Garnett From: New Brunswick, Visited on Sunday, October 28, 2012
Norm's Comments: The videos are great. It is nice to see the whole project from start to finish. Keep up the great work.
Dave Scott From: Monticello,Indiana, Visited on Sunday, October 28, 2012
Dave's Comments: very nice work enjoy videos
Jim C From: Orleans, Massachusetts, Visited on Wednesday, October 3, 2012
Jim's Comments: A great site. Very informative and exceptionally well done. Thank you for sharing so much
Louis Pittman From: Bismarck N. D., Visited on Sunday, September 9, 2012
Louis 's Comments: Very nice work and instructions
Steve Krumanaker From: Huntington IN, Visited on Sunday, September 2, 2012
Steve's Comments: I have watched your inside out video several times. You make it look so easy. I know from several failed attempts it is not. Really nice work and thanks for sharing.
Peter Lamb From: South Carolina, Visited on Saturday, September 1, 2012
Peter's Comments: your work is wonderful. Videos equally so. Thanks for the effort Founnd you on Sawmill Creek
Mark Smith From: Winter Park, FL, Visited on Saturday, August 25, 2012
Mark's Comments: Nothing earth shattering to share; just very much enjoy strolling around your site and certainly admire your work ...
Brian Schumacher From: Fort Bragg, Ca., Visited on Tuesday, August 21, 2012
Brian's Comments: loved your segmented sled and your vids.
Bb Lee From: Riverside, Visited on Tuesday, August 14, 2012
Bb's Comments: Great website can't wait for more!!!
Mark Smith From: Winter Park, Florida, Visited on Tuesday, June 26, 2012
Mark's Comments: I’m in the process of restoring to service an ancient, but in great condition, Craftsman spindle lathe inherited from my Dad as I start my foray into the world of turning. I much enjoy looking at the potential albeit [very distant] future projects rummaging around your site ...
Richard Morris From: Crystal River, Fl, Visited on Wednesday, June 13, 2012
Richard's Comments: Outstanding work. Your segmenting is amazing.
Gary Wright From: Harrisburg, Pennsylvania, Visited on Wednesday, May 30, 2012
Gary's Comments: Really nice work. I am new to segmented turning. I'll be making your "Laguana Beach" vase for a wedding couple. I'll send pics when complete.
jim bryan From: topeka, kansas, Visited on Monday, May 28, 2012
jim's Comments: Love your Celtic knot ornament. Found your site via Woodturning Magazine
Jim Sinacola From: Michigan, Visited on Monday, May 7, 2012
Jim's Comments: Like your web site
Greg Steffen From: Escondido, CA , Visited on Tuesday, April 17, 2012
Greg's Comments: very nice video of the pen.
Bruce Douthitt From: Summerville, SC, Visited on Tuesday, March 27, 2012
Bruce's Comments: Enjoy watching your segmented turning videos. I tried one, made a round box with a dome lid. It turned out real good, I am going donate it to the Relay for Life. Looking forward to seeing some more of your work. Thanks for sharing it with us.
Claus Groenquist From: Fyn, Danmark, Visited on Monday, March 26, 2012
Claus's Comments: Det er en fin hjemmeside du har, jeg har lige brugt en mere end 1 time her, og jeg kommer igen / It is a great website you have, I've just spent more than 1 hour here and I come back with best regards Claus
Bob Kottmann From: Brooksville, Fla, Visited on Saturday, March 17, 2012
Bob's Comments: Wow!
Gordon M From: Saskatchewan, Canada, Visited on Thursday, March 15, 2012
Gordon's Comments: Wow.. Nice site. I'm new to wood turning and need info. and ideas. Thank you for sharing.
Olivia Abdur-Rahman From: Northeast Florida, Visited on Wednesday, March 7, 2012
Olivia's Comments: Thank you for sharing your videos & your art. I hope God continues to reward you for your selflessness & generous spirit.
Mike Lee From: Burbank, Ca, Visited on Thursday, March 1, 2012
Mike 's Comments: Thanks for sharing your talent! New turner,you make it look easy.
Barry sedgley From: HAMPSHIRE, ENGLAND, Visited on Tuesday, February 28, 2012
Barry's Comments: Hi Larry your work is really great i am going to have go at some of the ornaments keep up the good work.
Herman L Debner From: Iowa, Visited on Friday, February 17, 2012
Herman L's Comments: Good material
Marshall Gorrow From: Hogansburg, NY USA, Visited on Sunday, January 29, 2012
Marshall's Comments: Larry, I very much enjoyed your website. Your videos are very professionally done. Thanks for making these available to all woodturners.
Dean Bandes From: Newton, Mass & Casco, Maine, Visited on Wednesday, January 25, 2012
Dean's Comments: Someone on the rec.crafts.woodturning newsgroup asked about the inside-out turning, and someone else said to search on inside out turning; google found you among others
Jed Dyke From: Rosamond, California, Visited on Wednesday, January 25, 2012
Jed's Comments: Wonderful site with outstanding project presentation!
Alan Matkin From: UK, Visited on Wednesday, January 25, 2012
Alan's Comments: Looks a very interesting site that I will enjoy in my Retirement
Chris Cisco From: Waco, Texas, Visited on Monday, January 23, 2012
Chris's Comments: Beautiful work. I am just starting out in woodturning and look forward to learning. Your vidio's are very informative and have already answers a lot of questions I had. I look forward to seeing more of you work in the future.
Brad Otto From: Fresno,CA, Visited on Sunday, January 22, 2012
Brad's Comments: I'm a member of Lumber Jocks, and IPT, Your turnings come up often in the fourms, and I understand why! There great and truly creative.
Beverley Pears From: Langley BC Canada, Visited on Thursday, January 12, 2012
Beverley's Comments: You have the best site ever. I plan to give all your projects a turn. Just finished the scoop. A little difficult for my level of turning but: First time successful. Thank you so much
Terry Daw From: Columbia, South Carolina, Visited on Wednesday, December 28, 2011
Terry's Comments: Enjoyed watching your videos on bell turning. Since watching I've learned to turn minis. to date I've gotten down to 3/8's inch but only one piece.. thanks for the video, T.Daw
Jim Stoppleworth From: Saginaw, Michigan, Visited on Saturday, December 24, 2011
Jim's Comments: Really enjoyed the 2011 Angel ornament video.
Brian Jordan From: Helena, Alabama, Visited on Monday, December 19, 2011
Brian's Comments: Love your work! I'm a beginner but one day.....
Chuck George From: PA, Visited on Friday, December 16, 2011
Chuck's Comments: Very nice. Love the Christmas tutorials
Jean-Pierre C From: France, in the Alps, Visited on Friday, December 16, 2011
Jean-Pierre's Comments: Your videos are inspiring, and the music is relaxing. What else can I ask ? Amicalement,
Wil Beebe From: The Villages, Fl., Visited on Friday, December 16, 2011
Wil's Comments: I just finished watching your Christmas angel turning for the third time. Its fun to watch. Merry Christmas from the Beebe's.
Bruce Smith From: Columbus, Ohio, Visited on Thursday, December 15, 2011
Bruce's Comments: Love your videos and projects!
Brad Short From: Archbold, OH, Visited on Tuesday, December 13, 2011
Brad's Comments: Very nice web site and thanks for the videos nicely done,
MIKE FREITAG From: PA, Visited on Saturday, December 10, 2011
Marcos Ferraz From: Brasil, Visited on Wednesday, December 7, 2011
Marcos's Comments: Eu queria apenas lhe parabenizar pelos trabalhos aqui postados. São muito bem feitos. Nota-se de cara que foram feitos por quem realmente ama o que faz. Muito obrigado Larry Marley por compartilhar seu conhecimento com todos nós...
Leslie Taylor From: Worksop, United Kingdom, Visited on Wednesday, December 7, 2011
Leslie's Comments: Great site and very inspiring.
Randy Allen From: Republic, Mo., Visited on Monday, December 5, 2011
Randy's Comments: You Sir, are a true master. I have the utmost respect for someone who has spent the time to work out the technique, and then share that knowledge. Thank you.
Jared Easton From: British Columbia, Canada, Visited on Monday, December 5, 2011
Jared's Comments: Thank you, thank you, thank you! I've always respected woodworkers who post step-by-step video's. You've just helped me and a few of my students make nutcracker ornaments for Christmas.
John Mc Aloran From: Northern Ireland, Visited on Saturday, December 3, 2011
John's Comments: Fantastic work and the video clips are very helpful. Keep up the good work. Happy Christmas to you from Ireland. !!!!!!!!!!!!
Joe Fernandes From: Toronto, Visited on Friday, December 2, 2011
Joe's Comments: Thank you for the generosity of your time and helping learners like me. Great job, keep it up and God Bless !!!
john wallis From: chester cheshire uk, Visited on Wednesday, November 30, 2011
john's Comments: started turning 2010 still learning just watched nut cracker great to watch john
Lynda Gaetano From: Austin, TX, Visited on Tuesday, November 29, 2011
Lynda's Comments: Enjoyable website...liked your videos and designs, also your stressing of the safety issues involved in wood turning. Thanks
Don Wolfe From: Carlsbad, CA, Visited on Sunday, November 27, 2011
Don's Comments: Met you today at La Quinta and visited your site. As a beginning wood turner, I really enjoyed your video's. They are great. Thanks!
pimont jean luc From: contry gard in france, Visited on Thursday, November 24, 2011
pimont's Comments: Bravo trés joli , magnifiqueet merci excuse me , no speack english very good, thanks
Eric Bast From: Fountain, Colorado, Visited on Wednesday, November 23, 2011
Eric 's Comments: I really enjoy watching your videos.
Dave Scott From: Indiana, Visited on Wednesday, November 9, 2011
Dave 's Comments: Thank you for your videos. have helped
Leroy Moldenhauer From: Berlin, WI., Visited on Tuesday, October 25, 2011
Leroy's Comments: I saw your train bowl in Woodworkers Journal and it looks really good.
bill le blanc From: tampa fla, Visited on Wednesday, October 19, 2011
bill's Comments: great job
Hermel Berube From: ajax canada, Visited on Sunday, October 16, 2011
Hermel's Comments: I won,t to no more segmented turnning.
Georges Jungels From: Lasauvage,Luxemburg,Europe, Visited on Saturday, October 15, 2011
Georges's Comments: Great Thank's
Robert DeHart From: Danville, Va, Visited on Sunday, September 18, 2011
Robert's Comments: very good segmented planer tool. thanks for the outstanding site
bill le blanc From: tampa fla, Visited on Sunday, September 18, 2011
bill's Comments: great web site thank you
Janice Bolding From: Edmond, OK, Visited on Thursday, September 15, 2011
Janice's Comments: Really enjoyed your videos. Thank you for having them to view. Inspired to give it a try.
Terry Daw From: Columbia, South Carolina, Visited on Tuesday, September 13, 2011
Terry's Comments: I really like your videos and the things you make, such an artist. Tdaw2461
Donald Prince From: United States, Visited on Sunday, September 11, 2011
Donald's Comments: I am the President of the Woodworkers of Whittier. I just fell in love with your work. Will be looking at your updates often.
Roger Mattiuz From: Avonmore, Ontario, Canada, Visited on Thursday, August 18, 2011
Roger 's Comments: Beautiful work and great website...congratuulations. Thanks for sharing your knowledge through your videos. I am a beginner/intermediate turner and have just completed my first segmented piece. Your videos are truly inspirational!! Keep up the good work.
Alfredo Alamo From: Tampa, Florida, Visited on Wednesday, August 17, 2011
Alfredo's Comments: The title of this guest book page is \"Say Hello\". First of all, how can I say hello if my jaw is on the floor. And second of all, the title should be \"SAY THANK YOU\" Mr. Marley the magnificense of your job is second to none, but the fact that you put all that knowledge and experience in our hands makes you second to none. My hat off to you; thank you.
Philippe Jeanty From: United States, Visited on Tuesday, August 9, 2011
Philippe's Comments: Pretty work you do. congratulations
Tim Whitehead From: St. Louis, MIssouri, Visited on Sunday, July 31, 2011
Tim's Comments: Thanks for the videos. They show just enough to demonstrate what you\'ve done, but not so much as to get boring. I do carving and cabinet making, but now I\'m inspired to save for a lathe. Unfortunately, I\'ve discovered that the cost of the tools and related apparatus can be more expensive than the lathe itself. But, what\'s life without goals. Thanks again for the enjoyable, educational and inspirational videos.
silvio de carvalho From: São Paulo - Brasil, Visited on Thursday, July 28, 2011
silvio's Comments: Olá Amigos, sou um torneiro brasileiro, e aprecio seus trabalhos, parabens
Paul Wingard From: Loxley Al., Visited on Saturday, July 23, 2011
Paul's Comments: Like your work, wish I a little bit that good. I just can\'t understand how you did some things
ROBERT DEHART From: DANVILLE VA., Visited on Thursday, July 21, 2011
Ronnie From: Kerrville,Texas, Visited on Thursday, July 7, 2011
Ronnie's Comments: Very professional. Thank you for sharing.
John Rooney From: Algona IA, Visited on Monday, July 4, 2011
John's Comments: Love your site. It is so much easier to watch some one actually doing a project than to try to explain with text and pictures
michael allen From: dublin ireland, Visited on Tuesday, June 28, 2011
michael's Comments: Hi I am new to woodturning. Very nice stuff.
Dean Mossbarger From: Cedar Rapids , IA, Visited on Saturday, June 18, 2011
Dean's Comments: Very Interesting craft ,real talent
Jeff Nichols From: Pflugerville, Texas, Visited on Friday, June 17, 2011
Jeff's Comments: Excellent work
Paul Bucca From: Boise, ID, Visited on Friday, June 3, 2011
Paul's Comments: Great work! -I have made both the Indian Blanket bowl (Tibbits) and the Turquise diamond bowl (Ray Allen), however, like you, I have modified it in both technique and size. I am currently looking for additional feature ring design segment patterns similar to what is in Nish\'s book. Have any ideas?
John Rooney From: Algona IA, Visited on Monday, May 30, 2011
John's Comments: Very nice web site, I have already got it bookmarked. Ilove the instructional videos, much easier to understand than just text and pictures
Terry McArthur From: Sioux City, Iowa, Visited on Friday, May 13, 2011
Terry's Comments: getting ready to start on bowl
ronald boucher From: Marietta Ga, Visited on Thursday, May 12, 2011
ronald's Comments: I just started segmented turning I use your seg/ calculation chart all the time,what a blessing. just want to cry, I,m so happy. I tell anyone and all of your web site thanks allot
Paulo Teixeira From: Porto Alegre - RS Brasil, Visited on Monday, May 2, 2011
Paulo's Comments: Dear Marley I have visited your page several veses. I\'ma pricinpiante the art. I live in Brazil in Porto Alegre. I want to congratulate you for the work as well as the videos that I did not look tired. A big hug Paulo Teixeira F Sorry if it is not good atradução was tratuzida by Google.
Tom D From: Crown Point, IN, Visited on Friday, April 29, 2011
Tom's Comments: Thx so much for the tree ornament demo. Boy, did you inspire me.
Michel Lavoie From: Greenfield Park, Canada, Visited on Wednesday, April 27, 2011
Michel's Comments: Very nice turning and thank you for your video.
Thomas Hart From: Kenna, West Virginia, Visited on Saturday, April 23, 2011
Thomas's Comments: Thank you for all of the information you share on this website.
Brian Woods From: USA, Visited on Monday, April 18, 2011
Brian's Comments: Found your site thru Woodturner\'s Resouce under video\'s. I really enjoyed my visit and will be back often. Brian
Dennis McGill From: Wisconsin, Visited on Friday, April 15, 2011
Dennis's Comments: Very informative.
Thomas Hart From: Kenna, WV, Visited on Monday, April 4, 2011
Thomas's Comments: Great website. Beautiful work.
vern leonard From: North Carolina, Visited on Monday, April 4, 2011
vern's Comments: Great information
Jeff West From: Cincinnati, Ohio, Visited on Saturday, April 2, 2011
Jeff's Comments: Thank You for managing such a great site, the projects are awesome and the videos wonderful to watch. I\'m new to turning and am inspired to try to replicate some of the ornaments. Thanks Again
Angel Rañón From: US, Tampa, Florida, Visited on Thursday, March 31, 2011
Angel's Comments: Love your Web.
Michael Allen From: Ireland, Visited on Tuesday, March 22, 2011
Michael's Comments: Beautiful work. I am only starting. Cheers.
James Martin Sr. From: Irvington,Alabama, Visited on Thursday, March 17, 2011
James's Comments: I really enjoy your site.
Mick Baier From: Lecompton, Kansas, Visited on Friday, March 11, 2011
Mick's Comments: Enjoyed a brief stop, I\'ll be back for more!
Martín García From: Zaragoza, Spain, Visited on Wednesday, March 9, 2011
Martín's Comments: Superd. When I see videos like yours I try to do something equal, but I can´t. At least, I learn the technique. Thank you (excuse me for my english).
Ross Frost From: Dunfermline, Scotland ,UK, Visited on Monday, March 7, 2011
Ross's Comments: Just finished watching your videos, fantastic work and illustrated so well ,im only a hobby turner but you have given me a few great ideas,thank you for posting them and hope you continue with your superb work,you made all look so easy which only goes to show how skillful you really are , thanks again for posting your an insparation to all, good luck i hope you make a million dollars mate cheers
Ed Baker From: Lebanon Me, Visited on Friday, March 4, 2011
Ed 's Comments: I am thankful for the seg section and the calculaters
SERGIO QUIRINO From: NOVA LIMA ,BRAZIL, Visited on Tuesday, February 15, 2011
Jose Jones From: The Future, Visited on Friday, February 11, 2011
Jose's Comments: Awesome! Awesome!
Clair Stewart From: Las Vegas, Nevada, Visited on Monday, February 7, 2011
Clair's Comments: I\'m really enjoying your video collection. Seeing you turn helps me visualize things I need to do better in my own turning.
Jed Dyke From: Rosamond, CA, Visited on Tuesday, February 1, 2011
Jed's Comments: Great videos and your style of showing how to turn is perfect! Thank you! -Jed
Jerry Anson From: Milwaukee, Wisconsin, Visited on Tuesday, February 1, 2011
Jerry's Comments: This is a very nice and informative web site. I will be visiting often.
Jean-François PLOTEAU From: Argenteuil, France, Visited on Thursday, January 27, 2011
Jean-François's Comments: Fantastic, you are doing a great job ! I\'m just starting wood turning. I hope I\'ll be able to do 2% of the quality of what you are doing in some years.
Gudbrandur Arnason From: Reykjavik, Iceland, Visited on Thursday, January 27, 2011
Gudbrandur's Comments: Grear website. Very informative. Thank you.
Cody Mahoney From: Logan Iowa, Visited on Wednesday, January 26, 2011
Cody's Comments: Love the site good tips and great turinings
Ed Fitzgerald From: Port Republic NJ 08241, Visited on Sunday, January 23, 2011
Ed's Comments: I used a wood lathe back in high school, I graduated in 68 now I might be thinking about retiring. I would like to get a decent lathe........... maybe...
Randy Alkins From: Warrington PA, Visited on Thursday, January 13, 2011
Randy's Comments: New turner, absorbing as much as I can. Plan on attending a few local woodturners meetings to meet and learn.
Allan Hampton From: Arkansas, Visited on Sunday, January 9, 2011
Allan's Comments: Thanks for your videos, you are an artist.
Gary O\'Connor From: Peterborough Ontario, Canada, Visited on Tuesday, January 4, 2011
Gary's Comments: Really enjoyed the videos. I am a new turner and always enjoy watching a pro at work. It always inspires me to hit the shop and start a new project. Thanks Marley
Mike Minto From: Yorktown, VA, Visited on Monday, January 3, 2011
Mike's Comments: Larry, I really enjoy your videos - imaginative and original - you\'re an excellent turner!
Bert Solis From: Simi Valley, CA, Visited on Saturday, January 1, 2011
Bert's Comments: Wow I just saw the video where you apply the tool to a metal piece is just great.
Bob Pfeil From: Goshen, IN , Visited on Friday, December 31, 2010
Bob's Comments: I enjoy viewing your art!
Bill B. From: Indianapolis, IN , Visited on Thursday, December 30, 2010
Bill's Comments: Great site with wonderful videos and great deal of inspiration from this rookie. Tripped over your site looking for inside-out ornaments. Hope to figure details, but video helped considerably.
Greg Yates From: Fort Myers Beach, Florida, Visited on Monday, December 27, 2010
Greg's Comments: I am a wood turner myself and I think you work is top notch
Charles Blackwell From: South Mills, North Carolina, Visited on Friday, December 24, 2010
Charles 's Comments: I am very impressed with your work; I have followed you for several years.
DAVID WORTHINGTON From: SUFFOLK ENGLAND, Visited on Friday, December 24, 2010
DAVID's Comments: GREAT
Giovanni Maggioni From: ITALY - Milan, Visited on Thursday, December 23, 2010
Giovanni's Comments: Very good
Edgar Kitchin From: United States, Fuquay Varina, NC, Visited on Wednesday, December 22, 2010
Edgar's Comments: A Super site!
Bob Smiley From: Irvine, Visited on Monday, December 20, 2010
Bob's Comments: Nice website!
Chad Harshbarger From: West Virginia, Visited on Sunday, December 19, 2010
Chad's Comments: Great job on your web site and your video! I am new to wood turning and found your site and videos to be a GREAT help!! THANKS
Anthony Scuncio From: N.Providence,RI, Visited on Sunday, December 19, 2010
Anthony's Comments: Great turnings.I really enjoyed all the videos.Thanks!!
Vincenzo Laperuta From: Italia, Visited on Sunday, December 19, 2010
Vincenzo 's Comments: i tuoi lavori sono belli complimeniti
Kevin Cavener From: Gahanna Ohio, Visited on Saturday, December 18, 2010
Kevin's Comments: Enjoy your video\'s... Was watching the square bowl video, what was the tool you used to keep the bowl on the lathe?
Robert Martinez From: US, Visited on Friday, December 17, 2010
Robert's Comments: enjoyed videos question what was the vacumed pump used for?
Don Main From: Broken Arrow, Oklahoma, Visited on Friday, December 17, 2010
Don's Comments: I am an old geazer who builds funiture for his grandkids. I started turning last year. Made my first segmented vase this year.
Tom Dill From: New York, Visited on Thursday, December 16, 2010
Tom's Comments: Thanks: You have showed me that turning is a fun thing and I should get back to my lathe
Bob Phelan From: Amherst, Ohio, Visited on Wednesday, December 15, 2010
Bob's Comments: Thank you so much for taking the time to put these videos together. I am realtively new to turning and your videos educated and inspired me to try some of your projects! FANTASTIC work! Thanks again!!!!
Kelly Hogan From: Beaver, PA, Visited on Tuesday, December 14, 2010
Kelly's Comments: Very nice work
Thomas Scaligeri From: new york, Visited on Sunday, December 12, 2010
Thomas's Comments: your work is great . I am now doing the Ornament for Christmas.
Randy Penney From: St. John\'s Newfoundland, Canada, Visited on Monday, December 6, 2010
Randy's Comments: I very much enjoyed the nutcracker video and, indeed, have enjoyed all your past sharings on your website. It is so refreshing to have someone share their knowledge and creativity as you are doing. All The best and Merry Xmas.
Larry Mageran From: Toronto, Ontario, Canada, Visited on Monday, December 6, 2010
Larry's Comments: I love your video on the Celtic Knot Christmas Ornament.... I can hardly wait to see what else your gonna do!!!!!! (I\'ve been turning for about 6 months.)
Bud Lies From: Reno, NV, Visited on Sunday, December 5, 2010
Bud's Comments: A top notch website, I\'ve learned so much from it.
John DeLong From: Poquoson, VA, Visited on Sunday, December 5, 2010
John's Comments: Bought my first laythe in March 2010 and have a great time learning to turn. The creativity that the laythe offers is like no other tool I have used. My wife and I now compete for time on who is in the garage to use the wood laythe. Thank you for such a great site.
Rob Evans From: Carrollton, Texas, Visited on Sunday, December 5, 2010
Rob's Comments: Liked the videos
adrien coblentz From: New Jersey, Visited on Sunday, December 5, 2010
adrien's Comments: Thoroughly enjoyed the Nutcracker soldier video. A lot more work than I\'d imagined.
Rob Wolfe From: Mansfield, Ohio, Visited on Sunday, December 5, 2010
Rob's Comments: I love your Nutcracker! I just watched the video. I would love to make one for my mother.
Jim Pope From: Carbondale, Illinois, Visited on Sunday, December 5, 2010
Jim's Comments: Thanks for sharing the wonderful video of the nutcracker !!!!
GUY NELSON From: ONTARIO CANADA, Visited on Saturday, December 4, 2010
Michael Smith From: Auburn PA, Visited on Friday, December 3, 2010
Michael's Comments: Thank you for your great videos. I have been working on lathe turning but now seem to have it coming together. I also took a 3 day class with David Elsworth.
Jim Underwood From: Georgia, Visited on Thursday, December 2, 2010
Jim's Comments: Merry Christmas Larry! It has become a tradition to watch your new Christmas video each year. Thank you for sharing your craft, and that wonderful music.
Ralph Buck From: Westbrook, Ct, Visited on Thursday, December 2, 2010
Ralph's Comments: Beautiful site. I am inspired to pick up my tools again. Should be good winter therapy, thanks
Art Manansala From: California, Visited on Tuesday, November 30, 2010
Art's Comments: I really enjoy all of your video\'s and artwork. The video\'s are so well done with great music. Your talent amazes and inspires me. I\'ll definitely be trying some of your techiques.
Jed Dyke From: Rosamond, CA, Visited on Sunday, November 28, 2010
Jed's Comments: Wonderful series of videos! Thank you!
Sandro From: Rome, Italy, Visited on Friday, November 26, 2010
Sandro's Comments: Beautiful works, congratulations.
Jim Greenfield From: Dallas, Georgia, Visited on Thursday, November 25, 2010
Jim's Comments: Great sight and wonderful turnings - like the segmented turnings
mike bauman From: Medina, Ohio, Visited on Thursday, November 25, 2010
mike's Comments: Good Work!
Bob Gorman From: Hope Mills, North Carolina, Visited on Wednesday, November 24, 2010
Bob's Comments: Very impressed with your video\'s and with you ability to turn the segmented bowls. I have just started segmented bowl turning and have only done 2 bowls. I would like more info on how to do the diamonds and other designs.
Mario Moran From: Sarnia,Ontario,Canada, Visited on Monday, November 22, 2010
Mario's Comments: You are very generous showing how you make those beautiful things. I been looking for inspiration for Christmas gifts. Do you mind if I make something similar? They will never be as nice as yours. Thanks.
BRAD BRIGGS From: ELLISTOWN, MS, Visited on Monday, November 22, 2010
BRAD's Comments: Thoroughly enjoyed your videos Larry. Incredible body of work, and very inspiring as well as instructional. Thanks for sharing your expertise with the world. God bless! Brad
Mike Smith From: East Riding of Yorkshire, England., Visited on Sunday, November 21, 2010
Mike's Comments: Brilliant web site. Very inspiring, informative and instructional. Thank you for taking the time to add to it. I am new to wood turning and find the site most helpful.
Dennis Stowe From: Pendergrass, Georgia, Visited on Saturday, November 20, 2010
Dennis 's Comments: Great web site. I always enjoy your projects.
Les Mannen From: Sarnia, Ontario, Canada, Visited on Saturday, November 20, 2010
Les 's Comments: I\'m enjoying your web site. I\'m a long time woodworker (40+ years) and have started an interest in woodturning, especially segmented bowl turning. Your web site is going to be great for me to get started. I\'ll be on it daily and glad I found it. Thanks and wishing you the best.
Derek Smith From: Burnham on sea England, Visited on Friday, November 12, 2010
Derek's Comments: Great web site very informative shows us what can be done
Josh Bowman From: Spring City, TN, Visited on Sunday, November 7, 2010
Josh's Comments: Nice website, thanks
Marvin Kaiser From: Pasadena, Texas, Visited on Saturday, November 6, 2010
Marvin's Comments: Very interesting, I will try
Ed S From: Virginia, Visited on Friday, November 5, 2010
Ed's Comments: Great site
Hernan Velez From: Colombia, Visited on Friday, November 5, 2010
Hernan's Comments: he aprendido mucho,y estoy fabicando un torno artesanal( hechizo ).... gracias.....
Bud Lies From: Reno, NV, Visited on Thursday, November 4, 2010
Bud's Comments: I have really enjoyed your website and am always looking for new projects and ideas.
Doug Elenbaas From: Lake Odessa mi., Visited on Thursday, November 4, 2010
Doug's Comments: good job
Jay Matula From: Alberta Canada, Visited on Friday, October 29, 2010
Jay's Comments: I really enjoyed your wishing well video
TERRY LILLEY From: YORKSHIRE ENGLAND, Visited on Wednesday, October 27, 2010
TERRY's Comments: Hi Marley Visited 28/10/10 new to turning fantastic videos and was especially interested in the Christmas decoration,but loved it all
Tony Johnson From: Garthorpe England, Visited on Sunday, October 17, 2010
Tony 's Comments: i do a bit of woodturning and i am some where about intermediate.i am going have a go at segmented turning when i get the courage.i am also doing scrollsawing which i also find relaxing.a very good site.thanks tony
Terry Jolly From: South carolina, Visited on Saturday, October 16, 2010
Terry's Comments: Beautiful work a i learned a thing or two. thank you for sharing you hobby.
Mike Kozlowski From: Dunkirk NY, Visited on Thursday, October 14, 2010
Mike's Comments: Hope to be half as good as you are someday keep up the great work
Nathan Hanvey From: Hebron, In., Visited on Monday, October 11, 2010
Nathan's Comments: The things I\'ve seen you make and the information you share on your website are wonderfull. Thank you.
James Schoenwalder From: Crivitz, WI, Visited on Monday, October 4, 2010
James's Comments: Thanks
Edgar Sims From: Peoria, Arizona, Visited on Friday, October 1, 2010
Edgar's Comments: I'm going to try the outsice christmas ornament. thanks for the information
Jos Servaes From: Belgium, near Antwerp, a small place called 'Overb, Visited on Monday, September 27, 2010
Jos's Comments: Beautyfull work, I have looked at your site with admiration. I'll certainly send you some questions in the future.(at the subject of good sharpening the tools) kind regards Jos
Mark Worthington From: Nephi, Utah, Visited on Friday, September 24, 2010
Mark's Comments: Enjoy checking in from time to time to see if you have new videos.
Bob Jennings From: Calgary, Alberta, Canada, Visited on Sunday, September 19, 2010
Bob's Comments: Really enjoy your videos, excellent instruction and great results, thanks
Dave Willey From: Sonoma County, California, Visited on Saturday, September 18, 2010
Dave's Comments: Beginning turner.
Karl Kelley From: Loganville, Georgia, Visited on Thursday, September 16, 2010
Karl's Comments: Looking over your guest book makes me realize how small our world is. Thanks for bringing us all together to learn new methods in woodturning...and thanks for a GREAT website!
sébastien pierre From: vesqueville , wallonie , en belgique ., Visited on Monday, September 13, 2010
sébastien's Comments: félicitations pour vos créations et votre créativitée .
Glenys Cooke From: England, Visited on Saturday, September 11, 2010
Glenys 's Comments: Love to watch your videos they are inspiring.
Paul Allanson From: Cheshire, England, Visited on Friday, September 10, 2010
Paul's Comments: loved your site
Mick Brown From: Essex England UK, Visited on Thursday, September 9, 2010
Mick's Comments: As a newcomer to turning I would like to thank you for your excellent site Very helpful and interesting Thank you
Gene Loehrer From: Baton Rouge La. U S of A, Visited on Wednesday, September 8, 2010
Gene's Comments: Great site Thanks for those most educational tutorials It is generous of you to share your experise on turning Thanks very much Gene
Woodrunner From: Cypress Tx, Visited on Sunday, September 5, 2010
Woodrunner's Comments: What you do is is a art, I enjoy seeing artist at work.
Pascal Anthemis From: Ohain - France, Visited on Thursday, September 2, 2010
Pascal 's Comments: I inquire for debuter in the wood-turning I am admiring bravo I would like to arrive at such a resultat
David Hunter From: York, Pennsylvania, Visited on Monday, August 30, 2010
David's Comments: I'm brand new to woodturning. I just happened on your website and am so impressed by your work and so anxious to create something of my own. You have inspired me. Thanks
Jim Schoenwalder From: Crivitz, WI, Visited on Monday, August 30, 2010
Jim's Comments: Great website, very educational, thank you
spanky beyer From: myrtle beach, sc, Visited on Sunday, August 29, 2010
spanky's Comments: love making sawdust!!!!!!!!!!!!!
John Jensen From: Saint Cloud, Florida, Visited on Sunday, August 29, 2010
John's Comments: After only viewing a few videos, I am impressed with your talent and imagination. The results are superb! Thanks for sharing them with us.
Jon Lanier From: Seaford, Delaware, Visited on Saturday, August 28, 2010
Jon's Comments: Just love learning as much as I can. Even if I can't do it.
Hernan Velez From: Colombia, Visited on Monday, August 23, 2010
Hernan's Comments: muy lindo trabajo......
Vlad Troche From: Phoenix, AZ, Visited on Sunday, August 22, 2010
Vlad's Comments: I am a beginner woodturner and love your videos. They are source of ideas and inspiration.
Carlos Mejía From: Bogotá, Colombia, Visited on Wednesday, August 18, 2010
Carlos's Comments: Perdóneme por escribir en español. Soy tornero y admiro todos sus trabajos, especialmente los de torneado segmentado.
Cecil Canam From: Nova Scotia Canada, Visited on Sunday, August 15, 2010
Cecil's Comments: great website would like plans for sled.
Rasmus Petersen From: Denmark, Visited on Monday, August 9, 2010
Rasmus's Comments: Sign me up for the newletter :)
Steve Lester From: Wales UK, Visited on Sunday, August 8, 2010
Steve 's Comments: I am looking to re-start woodturning after several years lay off. Thank you quite inspirational. Steve
Ron Romesburg From: Virginia Beach, VA, Visited on Tuesday, August 3, 2010
Ron's Comments: Active Member Tidewater Turners of Virginia
Wood Turner From: Alabama, Visited on Saturday, July 31, 2010
Wood's Comments: Enjoy the videos
GUY NELSON From: Smooth Rock Falls ontario canada, Visited on Thursday, July 29, 2010
GUY's Comments: love your work awsome i like segmented
Michael Brandt From: Kansas, Visited on Wednesday, July 28, 2010
Michael's Comments: Love your work. I've only been turning for a few months and learned alot from your videos. Keep em coming!!!
Thierry Meunier From: saint amand en puisaye FRANCE, Visited on Tuesday, July 27, 2010
Pascal ARNAUD From: Marseille France, Visited on Thursday, July 22, 2010
Pascal's Comments: Superbe réalisations, vous êtes une véritable source d'inspiration. Merci pour vos vidéos qui sont un trésor pour les tourneurs amateurs.
GUY NELSON From: SMOOTH ROCK FALLS ONTARIO CANADA, Visited on Wednesday, July 21, 2010
Tom Gleason From: Mission Viejo, Visited on Monday, July 19, 2010
Tom's Comments: I'm just learning wood-turning and just joined the woodworkers assn. Your projects and website are both very encouraging to me
ALAN MATKIN From: UK, Visited on Monday, July 19, 2010
Mike Willeson From: Sioux Falls, SD, Visited on Thursday, July 15, 2010
Mike's Comments: Love your website. The turning set to music is great. I look forward to new projects on your site.
Roger Richard From: I am from St-Antoine, New-Brunswick, Visited on Thursday, July 15, 2010
Roger 's Comments: I have enjoy your video very much. I have been turning for 5 years now and last few year into segmented turning. I reall like your Christmas ornament and intend to try some. Your video to me are very clear. Thank for putting then here for us to see.
DON BARR From: ARIZONA, Visited on Tuesday, July 13, 2010
Spike Unkis From: Northern Illinois, Visited on Tuesday, July 13, 2010
Spike's Comments: Love coming to this site. I'm working on making a segmented sled based on your design.
Joshua Bradley From: Wichita Falls, Tx, Visited on Sunday, July 11, 2010
Joshua's Comments: I really enjoy your site. I check it often and have watched some of the videos more than once. Thanks
Maurice McLeod From: Abilene, Texas, Visited on Saturday, July 3, 2010
Maurice's Comments: Great site!
Michael McDaniel From: Lilliwaup, Wa., Visited on Friday, July 2, 2010
Michael's Comments: Hey Marley, Very intriguing turnings. I'm new to turning and have been having a ball turning miniature bird house ornaments. I was doing a bing search on similar turnings to see if I could figure out how to price them and I came across your site. Facsinating. You have inspired me greatly. Thankyou very much, and God bless.
kat mccall From: florida, Visited on Tuesday, June 29, 2010
kat's Comments: thanks so much for the inspiration to a beginning novice! I look forward to many more tutorials with the wonderful music!
Terence Smith From: Brentwood U/K, Visited on Saturday, June 26, 2010
Terence's Comments: Great videos Thanks
Páid Ó Cianáin From: Belfast, Ireland, Visited on Tuesday, June 22, 2010
Páid's Comments: Absolutely love the videos and look forward to the next with anticipation, Keep it up
Russell Ball From: Sunbury, Victoria, Australia, Visited on Saturday, June 19, 2010
Russell's Comments: Thanks Larry for putting up this great site. I loved the scoop turning vid but would love some more info.
Mark Worthington From: Nephi, Utah, Visited on Wednesday, June 16, 2010
Mark's Comments: I've been enjoying watching your videos. Your projects are great looking but also simple. I like that.
JOHN HAMPTON From: Knoxville,TN, Visited on Sunday, June 6, 2010
JOHN's Comments: I Like all of your video
Phil Sarullo From: Madison, MS, Visited on Thursday, June 3, 2010
Phil's Comments: I was never interested in turning until visiting your website. Now I can't wait to get my lathe. Fantastic job Larry and thanks for sharing.
Cesar Rodolfo From: Brazil, Visited on Monday, May 31, 2010
Cesar's Comments: I'm realy realy impressed! Congratulations!!!
Mike Pappas From: Leicester, Mass., Visited on Saturday, May 15, 2010
Mike's Comments: Beautiful work!!!!!
Terry Snowden From: Spring Grove, MN, Visited on Friday, May 14, 2010
Terry's Comments: What a terrific site. Lots of work, but much appreciated by many.
Richard E Erickson From: Santa Barbara, CA, Visited on Wednesday, May 5, 2010
Richard E's Comments: Nice site with plenty of samples. Lots of learning and wood chips. You mentioned Laguna. My Uncle was Mayor ( Glen Vedder). Spent most of my summers during my growing years at Tyrants Cove. Well done.
Odd-Arne Johnsen From: Nothern Norway, Visited on Wednesday, April 21, 2010
Odd-Arne's Comments: Hi there. Really like your videos. They are very inspiering. I just got my very first lathe. So the tips and technics came very useful :)
julio jaime From: Cordoba Argentina, Visited on Friday, April 16, 2010
julio's Comments: hola que tal te felicito por tus trabajos me dejaste con la boca abierta con semejantes bellesas lamentablemente aca en argentina no se ven ni se promocionan ese tipo de artesanias te saludo atte un umilde colega.
Robert Smith From: Garland, Texas, Visited on Thursday, April 15, 2010
Robert's Comments: Wow,
Beth Miller From: Huntsville, AL. USA, Visited on Tuesday, April 6, 2010
Beth's Comments: Thanks for the video's. I am a "Newbie" woodturner and have enjoyed watching your video's. Very informative
Chris H From: Ocala, Florida, Visited on Thursday, April 1, 2010
Chris's Comments: I just came across your website and it shows some wonderful inspirational ideas. you really know how to express the beauty in different woods. i started just recently in segment turning, and it's a great way at expressing combination, and it seems you really are the master of it.
lecorre jean-lou From: vendée france, Visited on Saturday, March 27, 2010
lecorre's Comments: j'ai été enchanté par vos démonstrations et votre habileté avec vos outils, bravo
Arne Rogde From: Stavanger, Norway, Visited on Tuesday, March 23, 2010
Arne's Comments: Thanks for very instructive videos and good ideas for my own woodturning
Vic Sampson From: Bellflower,Ca, Visited on Sunday, March 21, 2010
Vic's Comments: Thank you for the info on turning
Ron Swanson From: Seattle, Washington, Visited on Wednesday, March 17, 2010
Ron 's Comments: Just starting on the turning. I love your work you are an insperation. Great work.
Guy Schmidt From: Great Falls, Montana, Visited on Monday, March 15, 2010
Guy's Comments: A very well done site! I enjoyed viewing it and seeing your excellent work.
Josh Lowry From: Illinois, Visited on Friday, March 12, 2010
Josh's Comments: Thanks for sharing your skills, techniques, and ideas on the site! Very well done and appreciated.
Aubrey Blalock From: Beaumont Texas, Visited on Friday, March 12, 2010
Aubrey's Comments: Please, more videos. They are fun, inspirational and instructive. Some of the best on the web. And, the music is great.
Páid Ó Cianáin From: Ireland, Visited on Thursday, March 11, 2010
Páid's Comments: Just coming into woodturning and found your site through the Segmented Turning site. I'd like to say that your video section is first class, well made and apart from informative its very entertaining, keep it up. Loved the Celtic Knot Chrismas decoration!!!
Stephen Furniss From: Pleasant View Utah, USA, Visited on Wednesday, March 10, 2010
Stephen's Comments: Outstanding, lots of good information. Please do some new videos on more projects.
Jan Ayres From: socal, Visited on Monday, March 1, 2010
Jan's Comments: These beautiful pieces must be the reason your nickname is "Woody".
Thomas Wrobel From: USA, Visited on Wednesday, February 24, 2010
Thomas's Comments: Excellent work!!!
Gib Oswald From: Las Vegas, Visited on Monday, February 22, 2010
Gib's Comments: I really enjoyed watching your hollow egg exibition
Tony Linham From: 25miles South of Bristol GB, Visited on Sunday, February 21, 2010
Tony 's Comments: You have a great web site. I am in the process of making changes to my ( Workshop )gardenshed so that I make a start on Segmented bowls ect. I feel I have left this a bit late in life, 75 in 3 months.But it is never too late untill it is too late. Hi Hi,.
Michael Pawelczak From: Indianapolis, Visited on Friday, February 19, 2010
Michael's Comments: very nice work I enjoyed the segmented stuff im going to try some this week
Tom Barten From: Tweedheads Australia, Visited on Thursday, February 18, 2010
Tom's Comments: I am a 83 year old turner and saw your address in the australian wood worker and I would like to see more ideas.
Walt Samselski From: Poughkeepsie,NY, Visited on Sunday, February 14, 2010
Walt's Comments: You make it look too darn easy. Keep it up.
Dave Boyce From: League city Tx, Visited on Monday, February 8, 2010
Dave's Comments: loved the video on the segmented ornament. I am new to this so was very impressed
Rolando PIche From: Los Angeles, Visited on Sunday, February 7, 2010
Rolando's Comments: Love your work, I'm a neebie starting on pens. I'm trying to get as info as I can online so any help is appreciated.
Ira Daigle From: New Iberia, Louisiana(WHO DAT , Visited on Sunday, February 7, 2010
Ira's Comments: First time visit to your site. Real nice job. Will visit again.
Susan Shane From: Baltimore, MD, Visited on Thursday, February 4, 2010
Susan's Comments: Hello, Just had to tell you that I really enjoy your very well done videos. You are such an inspiration. God's blessings, Susan
Rick Hertenstein From: Beloit, Wisconsin, Visited on Monday, February 1, 2010
Rick's Comments: Thanks for sharing you work, I have learned alot from your videos. You have inspired me to turn all day if I can.
Dennis Hooge From: Lethbridge,Alberta,Canada, Visited on Monday, February 1, 2010
Dennis's Comments: just great way of presentation and clear examples .
Keith STEADMAN From: Queensland Australia, Visited on Thursday, January 28, 2010
Keith's Comments: Fantastic site learnt so much on my first visit
Dan Leslie From: Canton. Georgia, Visited on Monday, January 25, 2010
Dan's Comments: I enjoyed the video's very much- have watched them several times; you make it look so easy!
Ron Carney From: England UK, Visited on Saturday, January 23, 2010
Ron's Comments: Fantastic site Larry I like the segment sledge you use, It is nice to see free demos of your work, thanks
Johnny Cobb From: Lexington, SC, Visited on Thursday, January 21, 2010
Johnny's Comments: Larry, Thank you for a site that drives my passion. I'm a retired & disabled vet from Orange County living in South Carolina. Bowls are my passion, and after seeing your work, segmented bowls are my goal. I actually learned celtic knots from pausing and playing your video over & over & over. Thanks again for the site!!
Dave --- From: Virginia, Visited on Sunday, January 17, 2010
Dave's Comments: I hope to learn as much as you have already forgotten about turning. You are great!
Daniel Botelho From: Falmouth,Mass, Visited on Saturday, January 16, 2010
Daniel's Comments:
Ronald U'Ren From: Port Ludlow wa.usa, Visited on Saturday, January 16, 2010
Ronald's Comments: I am just starting to turn, and like to see all of the wonderful things you have turned.
Robert Chircop From: MALTA, Visited on Wednesday, January 13, 2010
Robert's Comments: Very informative site. Thankyou for sharing work beautiful work with us.
Andy Daniels From: Meridian ,Idaho, Visited on Sunday, January 10, 2010
Andy's Comments: What a great site will put it on my favorites.
Robin Lane From: Cotleigh nr Honiton, Visited on Sunday, January 10, 2010
Robin's Comments: hollow egg was amazing, I may buy a lathe now
Billy Byrne From: Liverpool England, Visited on Friday, January 01, 2010
Billy's Comments: nice work
Ray Bowers From: Alexandria, VA, Visited on Wednesday, December 30, 2009
Ray's Comments: Thank you for the wonderful videos! I started searching to learn about inside out turning and ended up staying for many more. Merry Christmas!
Amy Nielsen From: Maple Valley, Wa, Visited on Wednesday, December 30, 2009
Amy's Comments: I enjoy watching your video's, watch them every time I'm on the computer, wish you would do more, Do you sell the segmented cutting sled with the various angle cuts?
Dean Griffith From: Rochester Hills,Mich, Visited on Sunday, December 27, 2009
Dean's Comments:
Craig Trongaard From: Nekoosa, WI, Visited on Sunday, December 27, 2009
Craig's Comments: Great set of videos, thanks much for sharing.
Howard Herin From: Stockton, CA, Visited on Tuesday, December 22, 2009
Howard's Comments: I have re-visited several times and learned each time. Bravo!!!
Jon Madzelan From: Citrus Heights, CA, Visited on Monday, December 21, 2009
Jon's Comments: Just found your site. You have done an outstanding job putting it together. Videos are great. Watched them all and got some great points.
Kay Stolte From: The Villages, Florida, Visited on Saturday, December 19, 2009
Kay's Comments: Just heard about your site today. Great, can't wait to try the projects. Thanks
Bob & Nancy Eicher From: Orange City, Florida, Visited on Monday, December 14, 2009
Bob & Nancy's Comments: Thanks for your wonderful turnings, information, and a great turning site.
Keith Hutchison From: Barberton, OH, Visited on Sunday, December 13, 2009
Keith's Comments: great site, self taught and still learning, fantastic for inspiration
Paul Schultz From: Detroit, Michigan, Visited on Sunday, December 13, 2009
Paul's Comments: I'm going to have to try and make some of those Christmas ornaments. Those look great.
Frank Doyle From: Georgetown, MA, Visited on Saturday, December 12, 2009
Frank's Comments: Found you thru Woodturning, had to watch all your works of art - Inspirational
Keith Boughey From: Deltona, FL, Visited on Wednesday, December 09, 2009
Keith's Comments: Absolutely outstanding workmanship Marley, I especially loved the video on the wishing well, beautiful, pure genius. Many thanks for the inspiration. Keith
Roger Alexander From: Pekin, Illinois, Visited on Wednesday, December 09, 2009
Roger's Comments: Thank you for showing us how to do your work. I still have some time before Christmas. Plan on looking again, and again.
José Martins From: Portugal, Visited on Wednesday, December 09, 2009
José's Comments: Congratulations. Beautifull work and great learning experiences! Thank you!
Gloria Perry From: Richmond VA, Visited on Saturday, December 05, 2009
Gloria's Comments: GREAT WORK , I enjoyed every bit of your work ,man you have skills.
Robert Mauk From: Southern Maryland USA, Visited on Thursday, December 03, 2009
Robert's Comments: You are a very patient man, sir. I hope I can follow in those footsteps.
Jean-Pierre Fortin From: Chambly, Quebec, Canada, Visited on Wednesday, December 02, 2009
Jean-Pierre's Comments: Very nice work and very informative. I like your videos. Please continue to inspire everyone who love nice work
Steve Solina From: Indiana, Visited on Sunday, November 29, 2009
Steve's Comments: Great website,iam just learning to turn
Larry Krajewski From: La Crosse, WI, Visited on Saturday, November 28, 2009
Larry's Comments: Thanks for the videos! Love your sense of humor.
Raymond Chainé From: Asbestos QAuébec Canada, Visited on Sunday, November 22, 2009
Raymond's Comments: I very much love your site. Your pictures and vidéos are of great help to my initiation to turning. I have te same lathe that you have..
Robin Hoff From: Tustin, CA, Visited on Saturday, November 21, 2009
Robin's Comments: Great Site, Looking forward to getting my Laguna 16 tuned up soon? Congrats on Segmented award really some nice work.
Richard Baker From: Wimberley, Texas, Visited on Wednesday, November 18, 2009
Richard's Comments: AKA Richard Madison, Texian. Excellent video.
Rich Campbell From: Mesa AZ, Visited on Thursday, November 12, 2009
Rich's Comments: very clear no need for words great videos
Ken Waller From: Sharbot Lake, Ontario, Canada, Visited on Tuesday, November 10, 2009
Ken's Comments: Larry, you have provided a wonderful service for turners of all levels. Your videos are clear and precise and, without words, convey all necessary info for others to try what you have done. Well done!
G. Trottier From: Quebec, Canada, Visited on Saturday, November 07, 2009
G.'s Comments: Very good website, very informative and helpful. Thank you to share your knowledge with other turners.
Brad Farries From: Alberta, Canada, Visited on Friday, October 30, 2009
Brad's Comments: Love the site and your project videos. Can't wait to try some of them out myself!!
Karen Johns From: South Wales UK, Visited on Friday, October 23, 2009
Karen's Comments: I've just purchased my first lathe and am an absolute beginner. Your website is very inspiring and has been added to "my favourites". You have some great woodturniing videos, please add some more.
Reed Jones From: Cary, NC, Visited on Thursday, October 22, 2009
Reed's Comments: great work....I learned a lot
Owen Miller From: Sammamish WA, Visited on Monday, October 12, 2009
Owen's Comments: I still enjoy your work after looking at each one several times.
Doug Whitson From: Phoenix, AZ., Visited on Sunday, October 04, 2009
Doug's Comments: Good stuff as always - I appriciate you taking the time to show us how easy it is. Thanks,
Randy Wayne From: Deerfield Wi., Visited on Thursday, October 01, 2009
Randy's Comments: You do very nice work.
Jean Marie FRESCO From: FRANCE, Visited on Wednesday, September 30, 2009
Jean Marie's Comments: Sublime talent , ingéniosité et un don magnifique vite d'autre exemple en video merci
Gary Land From: Southgate,MI., Visited on Tuesday, September 29, 2009
Gary's Comments: I am very impressed with your work. Looking forward to seeing more A true craftsman
Dave Harrison From: Ocean Springs, Ms, Visited on Tuesday, September 29, 2009
Dave's Comments: You had W-A-Y to much fun with the egg and pen. I thoroughly enjoyed watching the videos, all of them. Thank You
Antonio Piñeiro From: A Coruña - Spain, Visited on Saturday, September 19, 2009
Antonio's Comments: Nice web. A lot of useful and clear information for turners
John Coyne From: Hampden twp, pa, usa, Visited on Thursday, September 17, 2009
John's Comments: your site is an inspiration! you have given me great ideas on techniques and projects - thanks!
Douglas Harris From: Phoenix, Arizona, Visited on Wednesday, September 16, 2009
Douglas's Comments: Thank you. You have great work habits and jigs. The start of square bowl was fantastic.
Richard E Erickson From: Santa Barbara, CA 93103, Visited on Monday, September 14, 2009
Richard E's Comments: I like what you've done but I really like what you are now doing. Segmented turning is such an exciting escape.
Russ Shamah From: Lakewood, Colo., Visited on Friday, September 11, 2009
Russ's Comments: I've learned a few things from watching the videos. Love the work, I'll be trying the square bowl soon, with a possible segment add to the piece. thanks and keep turning.
Mario Moran From: Sarnia,Ontario,Canada, Visited on Friday, September 11, 2009
Mario's Comments:
J.L. Jackson From: Encino, Calif., Visited on Thursday, September 10, 2009
J.L.'s Comments: I'm Sandy's first husband and Ethan's Grandpa. Your work is truly stunning. Ron should be proud.
Fred Conte From: Ocala, Florida, Visited on Monday, August 31, 2009
Fred's Comments: Thank you for sharing - loved the Christmas Ornaments - Great Site!
Thomas Dean From: Wilson, NC, Visited on Tuesday, August 25, 2009
Thomas's Comments: Your work is awesome. Thank you for sharing.
Bill Redmon From: Lockport, Il, Visited on Wednesday, August 19, 2009
Bill's Comments: Thank you for the time you have given. Your art is very inspiring
Janet Gutierrez From: Sacramento CA., Visited on Tuesday, August 18, 2009
Janet's Comments: Your site is fantastic. I am so excited to try to some of your designs...later of course as I am just a beginner. Thank you for being so generous with your talent and methodical "how to" video. I have paid over $100 for a class and not gotten as much out of that as one of your instructional videos..Thanks again!
Gary Janes From: Charlotte NC, Visited on Monday, August 17, 2009
Gary's Comments: Fantastic site...I've posted before. You must have a terrific time keeping buttons on your shirt! Inspiring work, you've a right to be very proud!
Richard Long From: Ogden,Utah, Visited on Monday, August 17, 2009
Richard's Comments: Great site, thanks for the infomation and videos,I'll be back.
Steve Helfer From: Mequon, WI, Visited on Sunday, August 16, 2009
Steve's Comments: Terrific website, very informative and helpful. Thank you for your efforts to develop the site and share this information with turners all over the world.
Marie Toland From: San Clemente, Visited on Friday, August 14, 2009
Marie's Comments: I am Erla's neighbor. Saw your bowl at the OC fair and it was magnificent.
Ed Hoxter From: Smyrna,de, Visited on Saturday, August 08, 2009
Ed's Comments: great work , i want to try segmented turning, just starting to turn
Doug Stewart From: Williams, Oregon, Visited on Tuesday, July 28, 2009
Doug's Comments: You are a Master of the craft and at imparting that knowledge. Thanks
Gene Darby From: Lenoir City, TN, Visited on Sunday, July 19, 2009
Gene's Comments: You have a great site, thanks for sharing your talent with us.
Earl Shackelford From: LaPLace, Louisiana, Visited on Wednesday, July 01, 2009
Earl's Comments: Thanks for the inspiration I got from watching the videos
DES BERRY From: Tasmania Australia, Visited on Tuesday, June 16, 2009
DES's Comments: Like the Christmas ornaments
Scott Hampton From: Visalia, California, Visited on Monday, June 15, 2009
Scott's Comments: Great Website. Really enjoy all the info, videos and your projects.
Harvey Ghesser From: Manassas, VA!, Visited on Sunday, June 14, 2009
Harvey's Comments: You are truly skillful! Congratulations! Beautiful work.
Gary Knotts From: Pigeon Forge TN, Visited on Thursday, May 28, 2009
Gary's Comments: Stumbled onto your site via Woodturning Online. Very impressive site and work.
Bob Tate From: Colorado Springs, Visited on Tuesday, May 19, 2009
Bob's Comments: Wonderful videos, fantastic graphics and photography. Thank you.
Steinar Vissebraaten From: NORWAY, Visited on Saturday, May 16, 2009
Steinar's Comments: Hi! A wonderful site to learn a lot from. Amazing is just a word that came to me seeing what you have made.
Al Fox From: Transplanted to Hummelstown, P, Visited on Monday, May 04, 2009
Al's Comments: Its a pleasure to admire your work as well as have the opportunity to view your video's. I've been doing wood working since my high school years, I'm 58. You have inspired me to get back into turning. Thank you.
Vince Cooney From: Huntington Beach, Visited on Monday, May 04, 2009
Vince's Comments: Hello Larry, I just caught the Woodturning Workshop episode that showed how to make your Bell Orniment. I thought it was cool that he gave you credit for the design. I also like to say that your carving was a little nicer. Keep up the good work, I really enjoy visiting your site. Vince
Alex Sul From: Corpus Christi, Visited on Thursday, April 30, 2009
Alex's Comments: I like your work a lot, and the video and music are great, Thanks for sharing
Jeff Burklow From: Lemont, IL, Visited on Wednesday, April 29, 2009
Jeff's Comments: thanks for the videos they are very inspiring! I find myself returning over and over to get more pointers. Keep up the great work!
Heidi Lomax From: Staffordshire, UK, Visited on Sunday, April 19, 2009
Heidi's Comments: hi, Very impressed with your visual tutorials. Learnt loads, especially how to make the scoop.
Phil Morrish From: Dorset, England, Visited on Wednesday, April 15, 2009
Phil's Comments: Browsing & found your website. I am hobby turner and think that your work is awesome and inspiring.
Scott Fruchter From: San Bernardino, CA, USA, Visited on Friday, April 10, 2009
Scott's Comments: Great site, loved the scoop video; I'll be back
Daniel Turpin From: from Gatineau Quebec, Visited on Thursday, April 09, 2009
Daniel's Comments: wow ! very nice pieces
Al Campney From: The Villages, FL, Visited on Sunday, April 05, 2009
Al's Comments: Loved looking at your site... learned a lot. Look forward to more.
John Zurales From: Wheaton IL, Visited on Sunday, April 05, 2009
John's Comments: Excellent site. I learn something new each time I return. Keep up the good work!
Jerry Parsons jr From: West Virginia, Visited on Saturday, March 21, 2009
Jerry's Comments: I just getting started in turning,& I can say you do incredible work!!
Linda Fern From: Ashland, Oregon, Visited on Thursday, March 19, 2009
Linda's Comments: Wow, my big brother is pretty cool!
Peter Cribari From: Toronto, Ontario, Visited on Friday, March 13, 2009
Peter's Comments: Your video tutorials are wonderfully filmed and inspiring. You make it look so easy. Thank you.
Rohn Stearns From: United States, Visited on Thursday, March 12, 2009
Rohn's Comments: I enjoyed looking at your website. Everything looks very nice. Rohn
Max McHaney From: Shalimar, Fl, Visited on Wednesday, March 11, 2009
Max's Comments: Great stuff on your site. Will pass it along to my friends.
Val Edwards From: Wakefield UK, Visited on Wednesday, March 11, 2009
Val's Comments: inspiring! I just want to turn something .... NOW!
David Cramer From: Michigan, Visited on Thursday, March 05, 2009
David's Comments: WOW Larry! Very inspiring videos, great music and awfully nice of you to be so sharing with your knowledge. Seriously, very cool. My 9 year old daughter enjoyed watching you turn the ornaments as much as I did. Well done sir. You have a gift!
Keith Perry From: Cornwall, England, Visited on Thursday, March 05, 2009
Keith's Comments: I am fairly new to woodturning and have watched all your video's, very informative, and Quality work too. Keep up the good work
Oliver Hardy From: Hampshire England, Visited on Friday, February 06, 2009
Oliver's Comments: I am a member of Surrey association of woodturners your turning is very nice
Terry Quiram From: Roanoke, Illinois, Visited on Tuesday, February 03, 2009
Terry's Comments: Thanks for the "how to" videos.
Andrew Gfrerer From: San Antonio, TX, Visited on Sunday, February 01, 2009
Andrew's Comments: I've been an amateur wood worker for a number of years and have also been interested in segmented turned bowl. You're pictures have provided a lot of inspiration
Raimonds Mass From: Latvia, Visited on Saturday, January 31, 2009
Raimonds's Comments: I like your job. The same I work with wood turning, furnitures and exlusive suvenires for Norwegian market.
Dave Traines From: Traverse City, MI, Visited on Saturday, January 31, 2009
Dave's Comments: Enjoyed the videos, very well done, you make it look easy
Mike Crawshaw From: England, Visited on Friday, January 30, 2009
Mike's Comments: Very informative and entertaining site. Great work, thanks for sharing.
Horace Williams From: Asheville,NC, Visited on Tuesday, January 27, 2009
Horace's Comments: Excellent site and will be returning very soon
Bob Jones From: Midvale, Utah, Visited on Tuesday, January 27, 2009
Bob's Comments: Inspirational ! Thanks for sharing these with us all!
Wullie Shields From: Edinburgh, Scotland, Visited on Monday, January 19, 2009
Wullie's Comments: Awesome you make it look so easy I`ve spent a small fortune on books, videos and DVD`s and I just find your site, pity there are no sizes what is in jar you are trying to mix thanks again will keep your site as favourites
Gary Nickles From: Bristol, Virginia, Visited on Sunday, January 18, 2009
Gary's Comments: Love your work.
Mike Svoma From: Bloomer, WI, Visited on Monday, January 12, 2009
Mike's Comments: WOW.......awesome work. Just Curious, what program do you use for calculating your segments?
Harold H From: Centre , AL, Visited on Sunday, January 11, 2009
Harold's Comments: Love your work > Thank you for showing us your different techniques.
Lou Morais From: Greenacres-Florida-USA, Visited on Saturday, January 10, 2009
Lou's Comments: Thank you very much.
MIGUEL GRANADOS From: TENERIFE-CANARY Islands-Spain, Visited on Saturday, January 10, 2009
MIGUEL's Comments: Larry, that really makes you great is that you share what you know, continues well, your work reveals what's in your soul, patience, wisdom and love of madera.Excuse me, my English is not very good.
Tom Cale From: Fort Myers , Florida, Visited on Friday, January 09, 2009
Tom's Comments: egg
Gary Slater From: St. Joseph, IL (Champaign 10 m, Visited on Wednesday, January 07, 2009
Gary's Comments: Great site and very nice turning!
Bob Huard From: Mackay nth Queensland Australi, Visited on Monday, December 29, 2008
Bob's Comments: great website that chrissy decoration was amazing thank you
James Campbell From: Duncan, South Carolina, Visited on Sunday, December 28, 2008
James's Comments: Really enjoyed your web page. Very neat work.
Trudy Ibbetson From: Home in front of the fire plac, Visited on Wednesday, December 24, 2008
Trudy's Comments: Wow! Larry, I couldn't wait to look at your art. Wow is all I have to say.
Ron Owens From: Ontario, Canada, Visited on Sunday, December 21, 2008
Ron's Comments: GREAT site Larry. Good clear videos & your work is superb. You are an inspiration to many around the world. Thanks for all your work producing this site.
Ralph Horrell From: San Antonio, TX, Visited on Sunday, December 21, 2008
Ralph's Comments: Getting back into turning and stumbled across your site. I love it!! Thank you.
Josh Peters From: Louisville KY, Visited on Saturday, December 20, 2008
Josh's Comments: You are a true inspiration. I'll be in my shop late tonight & at the library first thing in the morning
Dave From: Oregon, Visited on Friday, December 19, 2008
Dave's Comments: Thank you for the website
Rune Byholt From: Norway, Visited on Tuesday, December 16, 2008
Rune's Comments: Great site. Love the videoclips. This is what I want when I search the web for inspiration.
George Morris From: Philadelphia PA, Visited on Sunday, December 14, 2008
George's Comments: Great site did the goblet worked out great want to do a scoop next. Thanks! George
Phil Reeve From: France, Visited on Saturday, December 13, 2008
Phil's Comments: Thank you for renewing my flaging enthusiasm in trying to do segmented turning with little success
John Lowe From: Cahokia, IL USA, Visited on Thursday, December 11, 2008
John's Comments: very good videos and very inspiring to wood turner
Lynn PaCE From: Menifee Calif, Visited on Monday, December 08, 2008
Lynn's Comments: I am learning so much because of your videos...Keep it up...Wow what work.
Brian George From: Eau Claire, WI, Visited on Saturday, December 06, 2008
Brian's Comments: Thanks for the excellent demos...all of them!
Bill Folsom From: Fairbanks, Alaska, Visited on Saturday, December 06, 2008
Bill's Comments: Ditto to everyting posted and WOW. Going down and kick the dust off of my lathe.
Steve Frederick From: Upstate New York, Visited on Wednesday, December 03, 2008
Steve's Comments: Great site! Wonderful videos! Beautiful work! Thanks for the great work!
Bill Smith From: Gilbert, Arizona, Visited on Sunday, November 30, 2008
Bill's Comments: Great site, Wonderful Work, I'm just starting to learn wood turning, you'r a inspiration!
Del Clark From: Kansas, Visited on Monday, November 24, 2008
Del's Comments: Beautiful work,Great Ideas, Been trying them myself.
Robert Carter From: Atascadero California, Visited on Sunday, November 23, 2008
Robert's Comments: Thank you for this well laid out website. Your work is an inspiration.
Jim Underwood From: N. Georgia, Visited on Sunday, November 23, 2008
Jim's Comments: Hey Larry, Once again you've done a superb job on your Christmas ornament video. I've thoroughly enjoyed all of them that you've done. Thank you so much for doing this, and I wish you and yours a very merry Christmas. Underdog
Bruce Steger From: Peoria, AZ, Visited on Saturday, November 22, 2008
Bruce's Comments: I really enjoy your site. Thank you for sharing.
Dermot Forte From: Girvan Ayrshire SCOTLAND UK, Visited on Sunday, November 16, 2008
Dermot's Comments: Just the best site for woodturning demos Thanks Larry.
David Bell From: South Western Ontario Canada, Visited on Saturday, November 15, 2008
David's Comments: Excellent workmanship, I will be watching the videos again to learn.
Pat Harris From: Lexington, SC, Visited on Saturday, November 15, 2008
Pat's Comments: I have learned and enjoyed from watching your Videos - Thank YOU
Allan Hampton From: Arkansas, Visited on Saturday, November 15, 2008
Allan's Comments: Super work all the way around. Thanks for sharing.
RAY WHITE From: JUPITER, FLORIDA, Visited on Friday, November 14, 2008
Doyle Corder From: Sherman, Texas, Visited on Friday, November 14, 2008
Doyle's Comments: What talent you have. Only been turning a couple of years and will try some of your projects
Dana Christensen From: Simi Valley, Visited on Friday, November 14, 2008
Dana's Comments: Larry, your segments and turnings are awesome. I have just started on this journey, but from the looks of it I have a lot of fun in front of me.
Joe Pearson From: Denmark, Visited on Friday, November 14, 2008
Joe's Comments: Thanks a lot for sharing your know how, insperation is something we ALL can use and enjoy, Thanks
Tom Waicekauskas From: Illinois, Visited on Wednesday, November 12, 2008
Tom's Comments: Enjoyed your site - need to review the new celtic knot ornament - thanks for putting this on the web!
Alejandro Ruiz From: Santiago , Chile, Visited on Wednesday, November 12, 2008
Alejandro's Comments: Congratulation for your beautifull work
Bob Beaubouef From: McKinney, TX...just north of D, Visited on Wednesday, November 12, 2008
Bob's Comments: good looking stuff, quality video's
Mike Oszczak From: Penfield NY, Visited on Wednesday, November 12, 2008
Mike's Comments: Larry, your's is one of the best video (turning) demo site...a pleasure to watch & learn
Michael Cooper From: Forida Panhandle, Visited on Tuesday, November 11, 2008
Michael's Comments: Larry, thank you so much for hosting this web site and sharing your talent with us! I love watching your videos and learning more and more about wood turning! Take care sir!!
Rex Scates From: Boulder Creek, Visited on Tuesday, November 11, 2008
Rex's Comments: nice resource. You show things well
Andre Bessette From: Northern Ontario near North Ba, Visited on Monday, November 10, 2008
Andre's Comments: Your Designs are Amazing, And your Video presentation is one of the best set-ups i have seen Thankyou for taking the time to do it right Great Job!!
Larry Bourdeau From: Jefferson Texas, Visited on Sunday, November 09, 2008
Larry's Comments: Going to do my first segmented turning as a result of your video.
John Douglas From: Oslo, Norway, Visited on Sunday, November 09, 2008
John's Comments: Really like your segmented designs and the videos
Barry Lipson From: Attleboro MA, Visited on Saturday, November 08, 2008
Barry's Comments: I am new to wood turning and your videos.Thanks 11/08 /08
Tom Wilson From: Bainbridge Island, WA, Visited on Thursday, November 06, 2008
Tom's Comments: I'm new to your web site and am very impressed by your work and videos. Thank you for helping others.
Robert Trimmell From: Longview, Texas, Visited on Thursday, November 06, 2008
Robert's Comments: I am amazed by the depth of your videos.
Mauricio Ulloa From: Costa Rica, Visited on Monday, November 03, 2008
Mauricio's Comments: Great Work! You are trully an inspiration and an example to follow!!!! Thanks!!!
Rollan Freel From: Marshalltown, Iowa 50158, Visited on Friday, October 31, 2008
Rollan's Comments: Found your web site Oct. 31. Greatly impressed with the Celtic Knot Ornament Video.
Brian Graham From: Ontario Canada, Visited on Thursday, October 30, 2008
Brian's Comments: Top notch ! I have always wanted to try my hand at woodturning....your web site is inspiring. Great video's, ..I'll be watching for more from you.
Gary Griggs From: Indianapolis, IN, Visited on Thursday, October 23, 2008
Gary's Comments: Enjoyed your videos very much! Very interested in the Christmas ornaments. I , last evening, tried the Celtic Knot. Didn't come out so good.........Will try again. Any hints helpful. Thanx, again for a very enjoyable site.
Steve McCarron From: Chester, Nova Scotia, Canada, Visited on Tuesday, October 21, 2008
Steve's Comments: Awesome site, Very good videos, and your work, well what can I say, top notch, I just wish I knew what you have forgotten about wood turning. Segments is what I want to try next.
John Dean From: Lewes, Delaware, Visited on Tuesday, October 21, 2008
John's Comments: Your website is perfect for inspiring my high school woodworking students. I have showed a couple of your videos and they have inspired my students. Thanks
John Standley From: Lacey, Washington, Visited on Monday, October 20, 2008
John's Comments: Wonderful Videos
Charlie Creagh From: Eastpointe, Michigan, Visited on Saturday, October 04, 2008
Charlie's Comments: Enjoyed watching your videos. Thanks for showing them.
George Morris From: Philadelphia PA., Visited on Saturday, September 27, 2008
George's Comments: neat vidios ! Thanks !!
Kenneth Alspaugh From: Lansing, Kansas, Visited on Wednesday, September 24, 2008
Kenneth's Comments: I appreciated the quality of the video so I see better ways to handle lathe chisels. And what is possible
Derek From: Canterbury England, Visited on Tuesday, September 23, 2008
Derek's Comments: great inspiration for a newcomer to turning thank you
Ton Vredevoort From: Holland, Visited on Monday, September 22, 2008
Ton's Comments: erg mooi en fantastisch gemaakt
João Menegale From: Brazil, Visited on Thursday, September 18, 2008
João's Comments: Congratulations, I liked its works, debtor for showing them very. It forgives my defective English.
Michael Duguid From: Cincinnati, Ohio, Visited on Monday, September 15, 2008
Michael's Comments: Your music to the video's keep my attention to the very end. Bookmarked immediately.
Bob Addington From: Manchester, TN, Visited on Sunday, September 14, 2008
Bob's Comments: You do excellent work and have a first class site. I admire all of your Jigs. Great Ideas,
Fabricio Lagrimante From: São Paulo, Brazil, Visited on Thursday, September 11, 2008
Fabricio's Comments: Very nice work. God bless you.
Raymond Lanham From: Dallas, Tx, Visited on Thursday, September 04, 2008
Raymond's Comments: Loved the site. I, too, am a segmented turner. I'm in the process of creating a 14" disk sander and enjoyed seeing how you built yours.
A Rod From: On his computer. Somewhere in , Visited on Wednesday, September 03, 2008
A's Comments: Great job on the site! Niiiiiiice all you need the Myspace(r) site and you're set! Can you make Martini cups out of wood?
Tom From: Cheshire, UK, Visited on Thursday, August 28, 2008
Tom's Comments: wow, amazing, love the spoon never thought of doing it that way, great website its given me alot of inspiration
Vaughn Thom From: South Africa, Visited on Saturday, August 23, 2008
Vaughn's Comments: Hi. Just bought my first lathe, and am amazed at what you are doing. i'll be a frequent visitor for sure.
George Morris From: Philadelphia, PA, Visited on Wednesday, August 20, 2008
George's Comments: enjoy your videos!!
Vincent Massaut From: Belgium, Visited on Tuesday, August 19, 2008
Vincent's Comments: Nice site; nice videos !
John Greenaway From: UK, Visited on Monday, August 18, 2008
John's Comments: Brilliant video's
Darleen Shawl From: Woodlake, CA, Visited on Sunday, August 17, 2008
Darleen's Comments: Great videos!
Stu Hamblin From: Gulf Breeze, FL, Visited on Friday, August 15, 2008
Stu's Comments: Your found wood bowl looks like china berry
Larry McClish From: Punta Gorda FL, Visited on Monday, August 11, 2008
Larry's Comments: Great site. I work out of a garage also, and enjoyed seeing some of your space savers.
Dannie Strickland From: Currently visiting North Georg, Visited on Friday, August 08, 2008
Dannie's Comments: I am a woodturner, also. Attended a week long training session this May at John C. Campbell Folk School in Murphy, NC. Great experience.
Al Glaser From: Southern California, Visited on Wednesday, July 30, 2008
Al's Comments: Thank you for the site. Hope to see more soon.
Ron Campbell From: Cedar Springs MI, Visited on Tuesday, July 29, 2008
Ron's Comments: Nice site and great job. Just a beginner a need the help. Thanks
Michael Lavergne From: Lafayette, LA, Visited on Saturday, July 05, 2008
Michael's Comments: Great videos!! Thank you for posting them for all to see!
Robert Trama From: Brooklyn Ny, Visited on Saturday, July 05, 2008
Robert's Comments: best site i have come across yet, has answered a lot of questions. keep it up.
GRAHAM BUTT From: GANDER,NEWFOUNDLAND,CANADA, Visited on Friday, June 27, 2008
Pierre Flahaut From: North of France, Visited on Sunday, June 15, 2008
Pierre's Comments: I do the same thing, but i learned some tricks watching your Video, Thank you
Bill DeWitt From: Concord, CA, Visited on Saturday, June 14, 2008
Bill's Comments: Inspirational site! I shall put my old bowling pins to use making mallets, etc. Thanks
Sergio Lopes Garcia From: Brasil Sao Paulo Osasco, Visited on Tuesday, June 10, 2008
Sergio's Comments: Tenho aprendido muito com voce ,parabens um abraço.
Federico Bragante From: North Italy, Visited on Monday, June 02, 2008
Federico's Comments: Good Woork!!!
T.J. Lach From: Weston, Wi, Visited on Monday, June 02, 2008
T.J.'s Comments: Great site, you are not only a wood turner but an artist.
Richard Corley From: Picayune, MS, Visited on Friday, May 30, 2008
Richard's Comments: Love your site and videos. Great work. Thanks.
Larry Rupert From: Ohio, Visited on Saturday, May 24, 2008
Larry's Comments: I like your website, and projects, but much preferred the old video format. Larry
Roshan Samuel From: Australia, Visited on Tuesday, May 20, 2008
Roshan's Comments: Know whats the differance between an ordinary life and an extrodinary life? Just a little something extra! Outstanding my friend.
Bob Zamiar From: Dayton, NV, Visited on Thursday, May 15, 2008
Bob's Comments: It's wonderful for you to share techniques as you do. Inspirational. More More More..
Harold White From: Richmond VA, Visited on Monday, May 12, 2008
Harold's Comments: I was facinated by the hollow egg turning, and the breaking of the egg into the frying pan was a great touch. This a very interesting site, thanks for having it.
Ken Ward From: NC and FL, Visited on Friday, May 09, 2008
Ken's Comments: Just went thru your site and watched your vidios(finally got DSL)and would like to say,FANTASTIC site
Ivo Hristov From: Bulgaria, Sofia, Visited on Friday, May 09, 2008
Ivo's Comments: Congratulations from Bulgaria. This is wonderful working. Thank you for the videos.
Vu Nguyen From: Garden Grove, CA, Visited on Wednesday, April 23, 2008
Vu's Comments: Your works are inspiring me to turn some wood some day. I'm looking for a mini lathe first then.
Mark Johnstone From: Gloucester UK, Visited on Monday, April 21, 2008
Mark's Comments: you have inspiered me to make pens just ordered the first need to watch seg:bowl some more before i have a go at that
Bud Robinson From: Ojai, CA, Visited on Sunday, April 20, 2008
Bud's Comments: Beautiful work my friend.
Woody Myers From: York,Pa., Visited on Thursday, April 10, 2008
Woody's Comments: I enjoy watching your videos
Guy Rinn From: Sydney Australia, Visited on Friday, April 04, 2008
Guy's Comments: Love the site
Val Hayes From: Australia, Visited on Tuesday, March 25, 2008
Val's Comments: visited 26 march tried to watch videos but did not work
George Sveinbjornson From: Canada, Visited on Saturday, March 22, 2008
George's Comments: I have just bought a lathe. Never tried it before. Age 70. I used your site to learn about segmented turning and now am hooked. Tried one piece. Turned out well. Used you plans to make a mitre sled and a thickness sander. Thanks so much for your site.
Eugene Jursek M.D. From: Stow, Ohio, Visited on Tuesday, March 18, 2008
Eugene's Comments: Enjoyed and learned from your website. Thank you.
André Praet From: Belgie ( Vlaanderen ), Visited on Sunday, March 16, 2008
André's Comments: Proficiat !! Dat is "klasse". Dank voor de vele tips en voorbeelden. Ik bewonder je!!
Bill Stoltz From: Louisiana, Visited on Thursday, March 06, 2008
Bill's Comments: What an incredible gift that you have given to all who have interest in woodturning, Larry. Your site is unbelievable! Thank you very much.
Anne Salo From: Finland, Visited on Saturday, March 01, 2008
Anne's Comments: I´would like to live next door from you. Beautiful working.
Coyne Knight From: Zephyrhills, Florida, Visited on Sunday, February 24, 2008
Coyne's Comments: Thank you for sharing and inspiring us. Coyne
Jerry Russell From: Frisco, Texas, Visited on Thursday, February 21, 2008
Jerry's Comments: Very cool! Beautiful work, and that was quite a lathe upgrade :-)
FEDERICO From: ITALY(PIEMONT), Visited on Monday, February 18, 2008
FEDERICO's Comments: Very good...........Thank's for your great project video!!!!!!!
Milt Hansberry From: Just out side Seatle WA., Visited on Tuesday, February 12, 2008
Milt's Comments: Showing your shop ideas and projects really helps the rest of us. Thank you.
Bob Winter From: Juneau, Alaska, Visited on Sunday, February 10, 2008
Bob's Comments: Nice web site! Your videos are well done.
Toni Charbonneau From: Ventura, CA, Visited on Sunday, February 10, 2008
Toni's Comments: What a great website!!!! Thank you for the inspiration and for taking the time to put it all together!!! It's great!!!
Mike Minto From: Yorktown, VA USA, Visited on Thursday, February 07, 2008
Mike's Comments: I especially enjoyed your videos. Inspiring and thought provoking for the new turner!
Alvin White From: Murphy, North Carolina, Visited on Friday, February 01, 2008
Alvin's Comments: Greatly enjoy looking at your work. Your tips are quite helpful for a beginner. Thanks
Bruce Smith From: Columbus, Ohio, Visited on Tuesday, January 29, 2008
Bruce's Comments: Great Videos! Very informative and enlightening. I hope to do some segmented turning soon.
Steve Neubauer From: Castle Rock, Colorado, Visited on Saturday, January 26, 2008
Steve's Comments: I really liked the segment sled; it gave me some ideas for a small project I want to try.
Herman Kurman From: Argentina, Visited on Wednesday, January 23, 2008
Herman's Comments: Felicitaciones desde Argentina
Gary Freestone From: Australia, Visited on Sunday, January 20, 2008
Gary's Comments: Thanks so much for the videos and other work. I take inspiration whenever I watch them, which is often. BTW what are you using for the first coat on the pen?
Jim Knaub From: PA, Visited on Saturday, January 19, 2008
Jim's Comments: Really enjoyed your vedios. Thanks for the help!
MANUEL DE LA CRUZ From: CÃCERES - SPAIN, Visited on Thursday, January 10, 2008
Robert Schoenert From: San Antonio, TX, Visited on Wednesday, January 09, 2008
Robert's Comments: Very nice, very inspiring....aaah, gotta go make some sawdust.
Jon Doughty From: Singleton, Australia, Visited on Tuesday, January 08, 2008
Jon's Comments: Fantastic videos, such detail, you even manage to throw in a bit of humour!. You are a true artisan. Congratulations, look forward to seeing more in the future
Matthew Stemmler From: Colorado, Visited on Sunday, January 06, 2008
Matthew's Comments: hi i'm 16 years old and i'm in my highshools woods class and this sight has ispired to make a lot of diffent things thank you
Bernhard Hofmann From: Exmouth, Devon, United Kingdom, Visited on Sunday, January 06, 2008
Bernhard's Comments: I think the pen making video is fantastic. Very informative, fun, and nice music. Never made one but will try soon (supplier has no mandrel in stock). Your video makes it look like something I can do. Thank you very much.
Steve H From: Berkshire - UK, Visited on Friday, January 04, 2008
Steve's Comments: Wow, how inspiring you all I need to do is buy myself a lathe! Thanks
Keith Springford From: Switzerland, Visited on Thursday, January 03, 2008
Keith's Comments: Been checking this site for a year now, it`s so professionaly done. love it Larry, thanks for sharing
Izak Shoshana From: Israel, Visited on Friday, December 28, 2007
Izak's Comments: Thanks for sharing. liked it a lot!
KENNETH KENEALY From: CHESHIRE, Visited on Thursday, December 27, 2007
KENNETH's Comments: Great site ,beautirful work. Visited Thursday 27-12-2007
John Holloway From: Oak Harbor, WA, Visited on Wednesday, December 26, 2007
John's Comments: Great Site! I have really enjoyed the videos . . .
Donald Brookes From: Penrith, England., Visited on Tuesday, December 25, 2007
Donald's Comments: Merry Christmas Larry, and to woodturners everywhere. You're an inspiration to us all.
George Wetmore From: Brandon,Vermont, Visited on Monday, December 24, 2007
George's Comments: You are a great inspiration to all of us turners / Nice site
Rex Guinn From: Nicholasville, KY, Visited on Monday, December 24, 2007
Rex's Comments: I really like your web site, the video's are great and the shop with clickable images for the tools is a nice touch.
FRED JONES From: DIX HILLS, NY, Visited on Saturday, December 22, 2007
FRED's Comments: Neat stuff, nothing has any corners?
Guido Capitanio From: Venezia Italia, Visited on Saturday, December 22, 2007
Guido's Comments: guardo il tuo sito un giorno si ed uno no, lo trovo meraviglioso.purtroppo in italia non si trovano libri che insegnino ad incollare e tagliare i pezzi di legno per formare i diamanti che tu hai mostrato sul sito saresti così gentile da spiegarcelo? tanti saluti e di nuovo complimenti
Paul Gourlay From: Vancouver Island Canada, Visited on Thursday, December 20, 2007
Paul's Comments: Great videos Thanks
Art S. From: Beaufort, SC., Visited on Thursday, December 20, 2007
Art's Comments: Nice project pictures
Tom Sherman From: Roanoke, Va, Visited on Wednesday, December 19, 2007
Tom's Comments: Just spent an enjoyable hour looking over your site loved the videos great info on the tools and jigs.
Jim Pugh From: Clarksville TN, Visited on Monday, December 17, 2007
Jim's Comments: Great site, I love your work and look forward to building a tool box simular to yours.
Robert Forsythe From: WoodlawnTN., Visited on Sunday, December 16, 2007
Robert's Comments: I wish you would put in mesurements and or have a place we could use our printer . Nice sight good ideas.
James Schoenwalder From: Crivitz, WI, Visited on Saturday, December 15, 2007
James's Comments: A friend turns bowls and I am very interested, your site is helping to encourage me to buy a lathe and get started! Jim
Joe Sandoval From: Newnan, Ga, Visited on Saturday, December 15, 2007
Joe's Comments: New to turning. Love your web site, thank you so much for the videos and info.
Gary Janes From: Charlotte NC, Visited on Friday, December 14, 2007
Gary's Comments: Fantastic site. A tribute to a professional woodturner and great presentation. Very interesting and I thank you !
Gaston Vonck From: Kansas City, Visited on Thursday, December 13, 2007
Gaston's Comments: I learn about your video's. Thanks for to your work
Rudolf Möckel From: Germany, Hannover, Visited on Wednesday, December 12, 2007
Rudolf's Comments: I definitely like your videos!! I work on a Powermatic 3520B. I learned a lot from your videos!
Franco Guevara From: Phoenix, AZ, Visited on Tuesday, December 11, 2007
Franco's Comments: WOW!!! Most impressive. I am a beginner and am inspired by your videos, Bravo!
Earl Timmons From: Rochester Minnesota, Visited on Tuesday, December 11, 2007
Earl's Comments: I enjoy the video's and all the information. Thanks for a great website.
Alan Crabb From: Wiltshire, U.K., Visited on Tuesday, December 11, 2007
Alan's Comments: I've been turning for six months, got lots of inspiration from your great site. Thanks.
Mike Crawshaw From: Wiltshire, U.K., Visited on Tuesday, December 11, 2007
Mike's Comments: Great site, inspirational content
Kathy Ricci From: Voorheesville, New York, Visited on Sunday, December 09, 2007
Kathy's Comments: Great videos.....I'm going to the shop to try making a bell. Thanks!
George Brown From: Overland Park, Kansas, Visited on Saturday, December 08, 2007
George's Comments: Been Turning for about a year, your site was a gem for ideas! Thanks!!
Martin Griffiths From: Suffolk, UK, Visited on Saturday, December 08, 2007
Martin's Comments: Great videos. Nice homemade jigs.
Skip M. From: FAll River, Ma, Visited on Friday, December 07, 2007
Skip's Comments: Love the site and projects, I am going to try the outside in turning soon!!
Steve Straffin From: Massachusetts, Visited on Friday, December 07, 2007
Steve's Comments: excellent site...great direction...Thank You
John Lesemann From: New Jersey, Visited on Thursday, December 06, 2007
John's Comments: Being new to turning your skill obvious and I hope to sharpen my skills to at least near yours. Beautiful work
ANDY ANDERSON From: UPPER LAKE, CALIFORNIA, Visited on Thursday, December 06, 2007
ANDY's Comments: Thank you for the videos. I am just learning and what a help you are. Merry Christmas
Larry King From: Kinston, NC, Visited on Thursday, December 06, 2007
Larry's Comments: Your work has inspired me as a novice turner!
Andrew Reeson From: Meringandan, Queensland, Austr, Visited on Wednesday, December 05, 2007
Andrew's Comments: Awesome site. Great videos. Wish I had a workshop like yours ;)
John Brooks From: vicksburg, Ms, Visited on Tuesday, December 04, 2007
John's Comments: Thanks for sharing you work
RUS GORDINIER From: OXFORD MICHIGAN, Visited on Tuesday, December 04, 2007
Andy Ryan From: Mansfeild Ohio, Visited on Saturday, December 01, 2007
Andy's Comments: great job on everthing, turning and website.
Tom Walters From: Rohnert Park CA, Visited on Friday, November 30, 2007
Tom's Comments: i hope the ornamant is as easy as it looks... this is an amazing site by the way
Ed Fennell From: Myrtle Beach SC, Visited on Thursday, November 29, 2007
Ed's Comments: I enjoyed the bell I don't retain well by the time I get from the computer to the shop I'VE LOST IT Could you put it in writing?
RUSS COLONY From: ELMIRA.NY, Visited on Monday, November 26, 2007
ALAN MATKIN From: ENGLAND, Visited on Monday, November 26, 2007
Ervin Armstead From: Jacksonville, Florida, Visited on Saturday, November 24, 2007
Ervin's Comments: Nice!!
John Douglas From: Oslo, Norway, Visited on Saturday, November 24, 2007
John's Comments: Great and fresh approach for all us "wouldbe" turners. Many thanks
Valdir Jose Beraldo From: Salvador-Bahia-Brazil, Visited on Friday, November 23, 2007
Valdir Jose's Comments: What a show ! Contragulations, Larry
Bill DiMarco From: Middletown,RI, Visited on Friday, November 23, 2007
Bill's Comments: Music and Turning - Wonderful. Thanks
Santiago Palacios From: Colombia, Visited on Thursday, November 22, 2007
Santiago's Comments:
Martin Harris From: Sacramento, CA, Visited on Sunday, November 18, 2007
Martin's Comments: Wonderful site, Larry. Thank you.
Christina Torgerson From: Philomath OR., Visited on Sunday, November 18, 2007
Christina's Comments: Woodturning ROCKS!!!!!
Ray K From: Vancouver, WA, Visited on Sunday, November 11, 2007
Ray K's Comments: Very nice work and very inspiring to work towards. A+++
Donnie K From: Central Arkansas, Visited on Wednesday, November 07, 2007
Donnie's Comments: great work, and keep the videos coming.
David Winders From: Newcastle - England, Visited on Tuesday, November 06, 2007
David's Comments: Just discovered your site thru the woodworking channel. I'm going to make some Christmas ornaments. Thanks so much for the videos - inspiring.
Stuart Johnson From: Red Oak, Texas, Visited on Monday, November 05, 2007
Stuart's Comments: Just watched the videos. Great, thanks so much for sharing.
Reuben Palmer From: Norlina North Carolina, Visited on Sunday, November 04, 2007
Reuben's Comments: i like the inside outside turning very much , i have turned a few peices.
Robert Brown From: Laverton Victoria Australia, Visited on Friday, November 02, 2007
Robert's Comments: hi larry. thank you for your site . it was helpfull with my demo.on christmass ornaments for our club. keep up the good work. visited 3 .10. 07
Mark Miller From: Ottawa, Canada, Visited on Friday, November 02, 2007
Mark's Comments: Hi Larry GREAT work,if your videos don't inspire someone to go and buy a lathe and get started ................. Well what can I say.
Meir Swisa From: Israel, Visited on Saturday, 10/27/2007
Meir's Comments: thank you for great,site and beautiful work.
Yechiel Matalon From: Israel, Visited on Wednesday, 10/24/2007
Yechiel's Comments: very nice, thank you.
John Penrose From: Maysville, KY, Visited on Tuesday, 10/23/2007
John's Comments: Just found your web site. Great videos! Hope to learn much. Just Started to turn after 44 year lay off!
Arnulfo Reséndiz From: Rioverde ,S.L.P; México, Visited on Friday, 10/19/2007
Arnulfo's Comments: your work is like heaven , soo pretty , congratulations
Júlio Franco From: Brasil, Visited on Thursday, 10/18/2007
Júlio's Comments: Congratulations
Matthew Stemmler From: Colorado, Visited on Saturday, 10/13/2007
Matthew's Comments:
Gill vanderWerf From: Sharon PA, Visited on Tuesday, 10/9/2007
Gill's Comments: I get alot of real info from your website, around here there are no turners so i have to learn it all by my self.
Peter Fabricius From: Hanover, Ontario, Canada, Visited on Tuesday, 10/2/2007
Peter's Comments: Very nice shop, jigs and tools...
John Devost From: Halifax, Canada, Visited on Wednesday, 9/26/2007
John's Comments: Nice website, awesome videos hope you do more!
Gudleik Haneferd From: NORWAY, Visited on Tuesday, 9/25/2007
Gudleik's Comments: Very good site for learning
Henry Payne From: New York, Visited on Sunday, 9/16/2007
Henry's Comments: Great site and very good work both solid and segmented turning.
Stuart Ablett From: Tokyo Japan, Visited on Thursday, 9/13/2007
Stuart's Comments: I found your video on turning the "Inside-Out Ornaments" to be just great, I'm going to try some myself, thanks for taking the time to make that.
Larry Henry From: Rothesay, New Brunswick, Canad, Visited on Tuesday, 9/11/2007
Larry's Comments: Thank you for sharing your techniques. I like your use of the thickness sander to make your segment rings uniform in thickness. I did wonder what glue you are using on your segmented bowls.
Dermot Forte From: Scotland U.K., Visited on Tuesday, 9/11/2007
Dermot's Comments: Watched videos. Think the Christmas Ornament is great. You make it look so easy. What size of wood is used, can't quite make out size on video.
Ken Hartnett From: Ireland, Visited on Monday, 9/10/2007
Ken's Comments: Metal turner just about to begin wood turning........excellent site well done. Video's are really good.
Tom From: a boy and fellow lathe turner, Visited on Sunday, 9/9/2007
Tom's Comments: your wooden christmas decoration is remarkable i think it is such a great project and plan to do it in year 12
Dermot Forte From: Scotland U.K., Visited on Monday, 9/3/2007
Dermot's Comments: I think your work is great could not get videos to view, but i have seen them before on other sites. Love the Christmas one. Got you on my favorites keep looking for updates.
Paul Stroik From: Wisconsin, Visited on Sunday, 9/2/2007
Paul's Comments: Great site. Considering the hobby of Turning and this site provides great information.
Jon Lanier From: Xenia, Ohio, Visited on Saturday, 9/1/2007
Jon's Comments: Really Cool! And thank you so much. Being dyslexic watching video's is much easier learn. Please keep them coming.
Jerome Fehlker From: Belleville, Il., Visited on Wednesday, 8/22/2007
Jerome's Comments: Very interesting, would like to talk to you about a press I have designed and built
Lauren Howden From: Lincolnshire, Visited on Thursday, 8/16/2007
Lauren's Comments: Lovely work, great inspiration for yet another newbe like me!
Robin Costelle From: Fern Creek, Ky, Visited on Saturday, 8/11/2007
Robin's Comments: Very cool site! A person can really get a feel for segmenting-thanks for sharing-Robin
Robert Shanks From: St. Louis, Visited on Thursday, 8/9/2007
Robert's Comments: Nice web site. I love the free sharing of ideas and information on wood turning.
Steve Jones From: Moreton, Wirral, England., Visited on Thursday, 8/9/2007
Steve's Comments: I have been turning for about a year, I have found your site really great. The videos are absolutely superb, and the music goes well with them. I hope you manage to make some more to help us newbies!
Erla Curtin From: California, Visited on Monday, 8/6/2007
Erla's Comments: That bowl is absolutely gorgeous! Congratulations!! (Southwestern vase)
Chuck Ellis From: Tellico Plains, TN, Visited on Sunday, 8/5/2007
Chuck's Comments: Great work.. Want to try some of your techniques.
Jim Sevilla From: Owasso, OK, Visited on Tuesday, 7/31/2007
Jim's Comments: What a wonderful place. I'm just starting out with woodturning and found your site. Thank you so much for the knowledge and inspiration this has brought me. I also would like to know if you are selling your sled plans yet or can give a hint of how the brass bar ring mechanisim works I would guess its by fritction but only you would know.
Dominique From: France, Visited on Sunday, 7/21/2007
Dominique's Comments: Encore Bravo merci beaucoup de donner aux autres votre savoir faire merci beaucoup
Bob Chambers From: Salt Lake City, UT, Visited on Tuesday, 7/17/2007
Bob's Comments: Love the site! Love watching, and listening, to your videos.
Jim Holzschuh From: South Hero, Vermont, Visited on Tuesday, 7/17/2007
Jim's Comments: Getting my 3520B Powermatic today - can't wait to try it out
Terry Liebel From: Idaho, Visited on Sunday, 7/15/2007
Terry's Comments: You sold me my bandsaw when you were at Laguna Tools. After looking at your website, I want to get into turning. I'm thinking about getting a Powermatic Lathe like yours. Keep up the work. It's fabulous!
John From: Phoenix, Arizona, Visited on Sunday, 7/15/2007
John's Comments: New at this segment turning. Nice web site.
Susan Shane From: Overlea, MD, Visited on Sunday, 7/15/2007
Susan's Comments: Great site! Thanks so much for the video's. I am new to turning & sincerely appreciate seeing other artisans work and the steps it took to accomplish each piece. What an inspiration!
John Trott From: Naples, Florida, Visited on Tuesday, 7/10/2007
John's Comments: 10:06 PM Watched your videos. I am a very newbe. Very interesting.
Rookie From: Granbury, TX, Visited on Thursday, 6/28/2007
Rookie's Comments: thank you ever so much fer lettin me see yer technique...
Richard Smith From: Englang, Visited on Sunday, 6/24/2007
Richard's Comments: i reeley thort waw howe cool is that
Mark Olinde From: Baton Rouge, Louisiana, Visited on Friday, 6/22/2007
Mark's Comments: I really enjoyed your Christmas Ornament video and your site. Thanks!
Dusan Cosic From: Wales UK, Visited on Sunday, 6/17/2007
Dusan's Comments: Love it , Keep up the good work
Leo Frilot From: Baton Rouge, LA, Visited on Friday, 6/15/2007
Leo's Comments: Just checking your site out for the first time. Very organized and informative. See you around in the vortex!
Jim Bradstreet From: Henderson, NV, Visited on Tuesday, 6/12/2007
Jim's Comments: I enjoy watching your work.
Herman Kurman From: Argentina, Visited on Friday, 6/8/2007
Herman's Comments: Congratulations from Argentina
Nancy Marley From: Mission Viejo, Visited on Thursday, 6/7/2007
Nancy's Comments: I like the blue web site much better than the orange that it used to be!
Jay Andrews From: Southern California, Visited on Sunday, 6/3/2007
Jay's Comments: Nice work on the website.
Larry Marley From: Mission Viejo, CA, Visited on Sunday, 6/3/2007
Larry's Comments: Welcome to, I look forward to hearing from you.